• 39"L X 14"W X 2"H Middle Section
• 7"L X 14"W X 2"H End Section
• Reduce vehicle speeds 5-10 mph without tire or vehicle damage.
• Temporary or permanent installation on concrete or asphalt.
• Lightweight and flexible, it conforms to contours of road surface.
• Built to last, withstand over 2,000 psi pressure and won't chip, break or crack
• Easily transported and fast installation without the need for heavy equipment.
• Heavy duty product; Backed by a 2 year warranty;
• Can be installed by a single person with light tools
• Do not require repainting
• Easily movable and removable
• 2 year warranty against materials defect
A Speed Bump is a raised device, which is placed across a roadway to reduce vehicle speeds 5-10 mph. This option is ideal where vehicle speeds are expected to be lower. Order two end pieces and the appropriate number of middle sections to span the width of roadway.
Place in strategic locations on the street, in parking lots, around schools, on private residential thoroughfares or anywhere traffic calming is necessary. It slows traffic effectively without tire or vehicle damage. Use to control traffic speed during public events, gatherings, or special events. Temporary or permanent installation on concrete or asphalt. Mastic or anchor pins available as specified. Lightweight and flexible, it conforms to contours of road surface. Economical and built to last, ENVIROform speed bumps withstand over 2,000 psi pressure. Easily transported and fast installation without the need for heavy equipment. Features: Heavy duty product; Backed by a 2 year warranty; All Speed Bumps and Speed Humps are uniformly made; Can be installed by a single person; Maximum visibility; Do not require repainting; Installed with light tools; Easily movable and removable; Does not chip, break or crack; Long wearing; Environmentally friendly; Promotes recycling awareness; 2 year warranty against materials defect; Custom configurations to your needs.
12" Wide x 13 1/4" Long Printed on One Side These directional reinforcement devices give supplemental standard warnings and directions creating safer traffic control in the school area. Installs in seconds and firmly locks in place. Reusable, All-weather ABS plastic with UV. Used by thousands of schools, cities and utility companies.
Includes: two 5/16" Zinc plated steel nuts, four washers, and two 3" zinc plated hex bolts.
Sign meets the Manual on Uniform Traffic Control Devices (MUTCD) specifications for shape, color, dimensions, legend and illuminationn set forth by the Office of Traffic Operations, Federal Highway Administration, U.S. Department of Transportation. 18" x 24" (White/Red).
Fits in standard doorways, narrow hallways, and aisles. Prevents room entry during cleaning and maintenance. Pole extends 30" - 44". Color(s): fluorescent yellow/green. Sign dimensions: 11" x 18".
• 29"x42"x24" rolling changeable message board sign
• Two 7 line, 24"x 36" white sign faces
• 4" characters, 8" number and 9" headers
• 2-sided
• Fast assembly
Contains:
- Two 24"x36"x 4mm white sign faces with letter tracks on one side of each panel
- One set 314-4" letters, numbers and symbols (black letters, red numbers)
- Two 9" double sided headers
- SALE/Special (Red)
29"x42"x24" rolling changeable message board sign with two 7 line, 24"x 36" white sign faces with 4" characters, 8" number and 9" headers. 2-sided, fast assembly Contains: Two 24"x36"x 4mm white sign faces with letter tracks on one side of each panel, One set 314-4" letters, numbers and symbols (black letters, red numbers), Two 9" double sided headers, SALE/Special (Red).
This durable traffic sign is constructed of baked enamel nonrusting heavy gauge aluminum and is designed to provide many years of outdoor use. Has 3M Scotchlite reflective sheeting for high visibility day or night. Sign measure 30" x 30".
This durable traffic sign is constructed of baked enamel nonrusting heavy gauge aluminum and is designed to provide many years of outdoor use. Has 3M Scotchlite reflective sheeting for high visibility day or night. Sign measure 12" x 18".
This durable traffic sign is constructed of baked enamel nonrusting heavy gauge aluminum and is designed to provide many years of outdoor use. Has 3M Scotchlite reflective sheeting for high visibility day or night. Sign measure 12" x 18".
• All Plastic Sign Frame
• 24in x 24in legend area
• Has "School Bus Loading / Unloading" printed on both sides
• Regressed sign area helps to protect sign faces
• Features “click lock” hinges for a positive interlock in the open position
• Can be internally ballasted with sand
• Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces
• Outside Dimensions: 36”H X 25”W x 3”D
• Weight: 17 lbs.
Molded all plastic hollow sign frame that can be internally weighted down with sand. Only 3 or 4 pounds is recommended per leg. Most of the weight is at the bottom where it acts like an anchor. They are extremely durable. Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces. Features “click lock” hinges for a positive interlock in the open position. Legend area measure 24in x 24in. “School Bus Loading / Unloading” printed on both sides. Outside Dimensions: 36”H X 25”W x 3”D. Weight: 17 lbs. Ships UPS or FedEx Ground.
• 12”x 36”fluorescent yellow reflective sheeting with 10”x 24 white insert.
• Overall height of unit is 47”
• Post and panel are constructed of flexible polyethylene plastic
• Resistant too: ultraviolet light, ozone, and hydrocarbons.
• Anti-twist reactive spring assembly that rebounds to upright when struck.
• NCHRP-350 Approved.
• Weight: 12 pounds without base
Recommended Uses: Ideal for delineating crosswalks to reduce the risk of injury, death, and property damage.
These In-Street Pedestrian Crosswalk Signs provide enhanced conspicuity at un-signalized intersections in order to alert motorists to local laws concerning yielding to or stopping for pedestrians in crosswalks. The effectiveness of these pedestrian safety signs have been repeatedly supported by independent studies to demonstrate distinct changes in motorist behavior and accident incidence following installation.
Take care to avoid creating a trip hazard when using any sign in a crosswalk. Ensure that sign bases are installed outside the crosswalk area.
Bases NOT included (Order separately as indicated below)
- Pedestrians Crosswalk Signs with Fixed Post Spring can be used with the SS672P Surface Mount Fixed Base.
- Pedestrians Crosswalk Signs for Quick Release Post Spring can be used with the SS671P One Base® Portable Quick Release Base, or the SS673P Surface Mount Quick-Release Base.
12 3/4" Wide x 10 1/2" Long Printed on One Side These directional reinforcement devices give supplemental standard warnings and directions creating safer traffic control in the school area. Installs in seconds and firmly locks in place. Reusable, All-weather ABS plastic with UV. Used by thousands of schools, cities and utility companies.
• All Plastic Sign Frame
• 12in x 24in legend area
• Has "No Idling Zone" printed on both sides
• Regressed sign area helps to protect sign faces
• Features “click lock” hinges for a positive interlock in the open position
• Can be internally ballasted with sand
• Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces
• Outside Dimensions: 36”H X 13”W x 3”D
• Weight: 10 lbs.
Molded all plastic hollow sign frame that can be internally weighted down with sand. Only 3 or 4 pounds is recommended per leg. Most of the weight is at the bottom where it acts like an anchor. They are extremely durable. Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces. Features “click lock” hinges for a positive interlock in the open position. Legend area measure 12in x 24in. “No Idling Zone” printed on both sides. Outside Dimensions: 36”H X 13”W x 3”D. Weight: 10 lbs. Ships UPS or FedEx Ground.
18" x 18" x 3" (Square). 20 lbs. Base with 2 3/8" diameter Post ENVIROform Parking Lot Sign Units are ideal for parking lots, crosswalks, guard shacks, schools, industrial and construction sites, or anywhere portable outdoor signs are needed. The 60 lb. base is made from 100% recycled rubber and will not chip, crack or corrode. Each 60 lb. unit is flexible to withstand high winds and bad weather, as well as heavy traffic areas. Lighter weight models are ideal for indoor or light temporary use. The portable base makes lot maintenance and snow removal tasks easy. The sign base unit may be used in both indoor and outdoor settings. Bases clean up like new with whitewall tire cleaner (no wiping). The use of just one economical unit will provide enhanced parking lot safety and provide you with the capability of less liability/damage in vehicle incidents. One 60-pound sign base prevents more than eight tires from entering Americas landfills. - Signs not included.
• 7.5" x 3.25" insert sign for SS604M and SA150M Sign Vests
• Printed on 110 lb. card stock
• 8 legends available
This orange pinnie is constructed of nylon and stitched at edges to prevent fraying. Completely washable. 44" x 11 1/2" size. Elastic waist strap allows fit for all sizes.
Engineered to provide superior comfort and safety in the toughest work environments.
The Icon™ premium ANSI compliant breathable and high visibility jacket – polyurethane on 300 denier polyester. Engineered to provide superior comfort and safety in the toughest work environments.
Ideal Applications: For use in environments where high visibility and breathability are desired for wearer safety and comfort.
• Polyurethane on 300 denier polyester.
• ANSI/ISEA 107 Type R Class 3 compliant jacket for high visibility and breathability.
• Excellent daytime visibility.
• 2 inch silver reflective tape reflects light for 360° nighttime conspicuity.
• Waterproof and breathable fabric for all season comfort.
• Breathable. Test method ASTM E96.
• Overhead shoulder design for complete freedom of movement.
• Stitched and taped sealed seams for 100% waterproof protection.
• 2-way Zipper/storm fly front with throat guard, seals out wind and rain.
• Roll-a-way adjustable hood in collar design for added convenience.
• Full-vented cape back for improved air circulation.
• D-ring access for fall protection harness.
• Mesh/taffeta lining for added comfort.
• Hand warmer side pockets with front cargo pockets and hook & loop closure.
• Convenient front radio pocket with exterior badge holder.
• Inner breast pocket with zipper closure.
• Elastic cuffs with hook & loop take-up straps on sleeves.
• Tapered sweep with adjustable elastic drawcord on jacket for added protection.
• Dark colored front helps conceal dirt.
• 2 Mic tabs.
• Mildew resistant.
• Attachment points for use as shell in SYNC Jacket System.
• Ideal for protecting the face from wind
• Maintaining warmth in cold weather
• Has an adjustable design
• Made of 100% polyester plush fleece
• Drawstring for snug fit
Ideal for protecting the face from wind, and maintaining warmth in cold weather. Has an adjustable design and is made of 100% polyester plush fleece. Drawstring for snug fit.
Flex-i-Cold stays flexible up to -4 degrees Fahrenheit and will conform to the body. This non-toxic gel is encased in a puncture-resistant bag for multiple uses. You can heat this pack in the microwave or boiling water for use as a heat pack. Always follow label instructions for safe use. Packs remain flexible out of the freezer for an extended period of time. Non-toxic and non-caustic, bio-degradable - simply keep in freezer until needed. Available in 2 sizes, and sold in cases of 12.
Chain accessories for our plastic chain. These s-hooks have a UV protectant added to keep the colors bright and maintain the integrity of the plastic for five years of use. Set of 2. Available in 3 colors.
• 800 Yard range
• Power from 8 to 12 watts
• Adjustable volume control
• Powerful siren
• Ergonomic handle
• Convenient carry wrist strap
• Takes six AA batteries (not included)
• Yellow
Large groups and teams on wide open fields will benefit from this 8 Watt Megaphone. Able to be heard up to 800 yards away, this megaphone also comes with a built-in siren when you need to get their attention. The adjustable volume control allows you to adapt to different crowds and instances, while the convenient wrist strap and ergonomic handle makes it easy to hold and transport this megaphone.
• One of the most visible and space efficient barricades available
• Takes up half the space of traditional barricades
• Designed to withstand repeated impacts with little or no damage
• Has a recessed panel with engineering grade reflective sheeting
• Measures 8"w x 36"h
• Gemstone side wall provides strength and durability
• Oversized handle with comfort grip
• Flashing light mounting receptacle
• Made of low density polyethylene
• Federal Highway Administration Approved with HAS-10 / WZ-89
• NCHRP Compliant
The Gemstone is one of the most visible and space efficient barricades available. It takes up half the space of traditional barricades, which means less storage space taken and minimal footprint during use. Designed to withstand repeated impacts with little or no damage to vehicles or unit. Stackable with or without the base. Recessed panel with engineering grade reflective sheeting. Measures 8" w x 36" h. Gemstone side wall provides strength and durability. Flashing light mounting receptacle. Picking up and transporting (even with light attached) is a breeze because of its large handle with comfortable grip. Made of low density polyethylene. Federal Highway Administration Approved with HAS-10 / WZ-89. NCHRP Compliant.
• Air-activated Grabber Hand Warmers
• Portable heat in the palm of your hand!
• keep hands and fingers toasty for over 7 hours
• No shaking or kneading required; just open to start the process
• Non-toxic, environmentally friendly and odorless
• Each pack comes with two hand warmers
Portable heat in the palm of your hand! Air-activated Grabber Hand Warmers keep hands and fingers toasty for over 7 hours. No shaking or kneading required; just open to start the process. Non-toxic, environmentally friendly and odorless. Each pack comes with two hand warmers.
Safe-Step is a long lasting, adhesive backed tape designed especially for application in high traffic areas where slippery or dangerous surfaces may cause accidents. A rugged aluminum oxide grit surface is bonded to the tape and is impervious to water, grease, oil, detergents and solvents. Available in 2 Sizes and 4 Colors.