• 48" rain coat.
• Made with 0.35mm thick PVC and polyester fabric
• Vented cape back with storm flap.
• Detachable hood.
• Two outside pockets with flaps.
• Snap front closure.
• Light to medium duty
• Available with or without CROSSING GUARD emblem
Ideal for survey crews, law enforcement, military, ranching and forestry. This rain coat is made of a .35mm PVC layer over polyester perfect for light to medium duty applications. It features a vented cap back with a storm flap and detachable drawstring hood. A corduroy collar and 2 outside pockets with flaps. The front snap closure features a storm flap to keep the rain out even in the most punishing conditions.
• Made with 0.35mm thick PVC and polyester fabric
• Detachable hood with drawstring
• Storm flap front with snap closure
• 2 flapped front pockets with snap closures to secure valuables
• Cape vented back
• Corduroy collar for comfort
• Adjustable suspenders for with triangular buckles for a perfect fit
• Front fly opening with snap
• Light to medium duty.
• Applications: Crossing guards, survey crews, law enforcement, ranching, and forestry.
• Available with or without CROSSING GUARD emblem on back
Heavy duty .35mm PVC on polyester broadloom fabric offers long term durability. Complete 3-piece suit includes jacket (with corduroy collar and cape vented back), detachable hood and bib pants. Available in 4 sizes with or without CROSSING GUARD Emblem on back.
Wide-mouth, conical flask made of polypropylene. Comes with a screw cap, or can be used with a stopper. Chemical resistant, and autoclavable to 135º C. Graduated in easy to see green print. Sold in packs of 12.
• Injection molded traffic cones don’t stick together
• Patented interlocking design secures fluorescent portion of hazard cone to recycled black base
• Brilliant fluorescent lime cones with UV inhibitors to resist fading
• Superior flexibility in heat and cold
• Bounce back from an impact
• Recycled black base traffic cones look clean despite heavy use
• Available in 3 sizes
18" high with 11" square base
28" high with 14" square base
36" high with 14" square base
These Injection molded traffic cones won't stick together! Patented interlocking design secures fluorescent portion of hazard cone to recycled black base. Brilliant fluorescent lime cones with UV inhibitors to resist fading. Superior flexibility in heat and cold - PVC is better than rubber traffic cones and pylons, since it can instantly bounce back from an impact. The recycled black base keeps your cone looking clean despite heavy use, being run over, and tar stains!
This Type 1 (DIN# GL-45) Borosilicate Glass, general purpose media bottle is autoclavable with permanent white imprinted graduations and marking spots. The screw thread opening has an ID of approximately 300m. The supplied cap is liner-less and both the cap and drip free ring are polypropylene autoclavable to 140 degrees Celsius (284 degrees Fahrenheit).
Borosil brand pipettes are manufactured from specially selected heavy-wall machine-drawn borosilicate accurate bore glass tubing. They have precision formed jets and bevel ground ends to resist chipping. The graduation marks are in durable white enamel or amber stain, both are resistant to normal laboratory agents and repeated washing. All the pipettes are individually measured and then marked. Accuracy is ensured between any two readings, because of uniformity of bore. The pipettes can be autoclaved and if necessary can be flamed for sterilization.
These polypropylene bottles are rigid, translucent and have excellent contact clarity. These bottles can be autoclaved filled as well when they are empty. The polypropylene cap has a built-in seal ring to make these bottles leak proof. Avaialble in 5 sizes.
| Size | Height | Neck Diameter ID/OD |
Pack Size |
| 60ml | 72mm | 17mm / 22mm | Pack of 12 |
| 125ml | 110mm | 16.5mm / 20mm | Pack of 12 |
| 250ml | 139mm | 20mm / 25mm | Pack of 12 |
| 500ml | 165mm | 20mm / 25mm | Pack of 12 |
| 1000ml | 222mm | 20mm / 25mm | Pack of 6 |
• Constructed of 420D nylon pack cloth
• School Safety Patrol emblem on both sides
• Stitched fabric edges
• Elastic side straps
• Slip easily over a jacket or coat
• 2 Pass urethane coating
• Easily cleaned with a damp cloth
These Slip-Over Safety Patrol Capes are constructed of 420D nylon pack cloth and are screened with our School Safety Patrol emblem on both sides. The durable nylon material has a 2 pass urethane coating making them easy to clean with a damp cloth. They have stitched fabric edges and elastic side straps. These capes will easily slip over a jacket or coat.
Small
14 ½" Across should to shoulder
16" From Shoulder to hem
Medium
15" Across should to shoulder
22" From Shoulder to hem
Large
17" Across should to shoulder
27" From Shoulder to hem
• Raglan sleeves
• 100% nylon taffeta
• Byron collar
• Elastic cuffs
• Color-matched snap closure
• Reinforced nylon pockets
• Drawstring bottom
• Water repellent
Available in 5 colors with STAFF, SECURITY, or SCHOOL SAFETY PATROL screened on front and back.
Limited quantities available
These belts have a high visibility fluorescent strip and offer superior visibility at a reasonable price. Made of strong nylon webbing with Velcro for size adjustment. Available in 4 colors and 6 sizes.
Small = Waist sizes 23" to 27"
Medium = Waist sizes 27" to 30"
Large = Waist sizes 30" to 35"
X-Large = Waist sizes 36" to 44"
2X/3X = Waist sizes 44" to 52"
4X/5X = Waist sizes 48" to 56"
• Made with 0.35mm thick PVC and polyester fabric
• Detachable hood with drawstring
• Storm flap front with snap closure
• 2 flapped front pockets with snap closures to secure valuables
• Cape vented back
• Corduroy collar for comfort
• Available in 4 Sizes
• Available with or without CROSSING GUARD Emblem on Back
This bright yellow rain jacket is made of tough .35mm PVC and polyester fabric. Corduroy lined collar for comfort. Coat has cape-vented back . Includes detachable hood.
| Chest | Length | Sleeve | |
| Medium | 56 in. | 30.5 in. | 32 in. |
| Large | 58 in | 31.5 in. | 33 in. |
| X-Large | 60 in. | 32 in. | 34 in. |
| 2X-Large | 62 in. | 33 in. | 35 in. |
These polypropylene bottles are rigid, translucent and have excellent contact clarity. These bottles can be autoclaved filled as well as empty. The polypropylene cap has a built-in seal ring to make these bottles leak proof.
| Size | Height | Neck Diameter ID/OD |
Pack Size |
| 60ml | 73mm | 20mm / 25mm |
Pack of 12
|
| 125ml | 100mm | 27mm / 32mm |
Pack of 12
|
| 250ml | 137mm | 35mm / 41mm |
Pack of 12
|
| 500ml | 149mm |
35mm / 41mm |
Pack of 12
|
|
1000ml
|
218mm |
35mm / 41mm |
Pack of 6
|