• 15" x 15" sign
• Lightweight - weighs only 10 ounces!
• Lightweight corrugated plastic material with engineer grade reflective finish
• 1" PVC plastic handle.
Lightweight - weighs only 10 ounces! 15" x 15" size. Lightweight corrugated plastic material with engineer grade reflective finish. 1" PVC plastic handle.
NOTE: Does NOT meet MUTCD requirements for school zones.
• All Plastic Sign Frame
• Has a 12in x 24in dry erase board on both sides
• Regressed sign area helps to protect sign faces
• Features “click lock” hinges for a positive interlock in the open position
• Can be internally ballasted with sand
• Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces
• Outside Dimensions: 36”H X 13”W x 3”D
• Weight: 10 lbs.
Molded all plastic hollow sign frame that can be internally weighted down with sand. Only 3 or 4 pounds is recommended per leg. Most of the weight is at the bottom where it acts like an anchor. They are extremely durable. Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces. Features “click lock” hinges for a positive interlock in the open position. Has a 12in x 24in dry erase board on both sides. Outside Dimensions: 36”H X 13”W x 3”D. Weight: 10 lbs. Ships UPS or FedEx Ground. NOTE: This item is not intended to be left outdoors, or used outdoors during wet weather.
Riveted joint. Nickel plated. 9 inches long. Also for test tubes and vials.
• 100% acrylic
• Silver reflective stripe for visibility
• Great for under a hard hat or to wear alone
• Hi-Viz lime
• One size fits most
100% acrylic. Silver reflective stripe for visibility. Great for under a hard hat or to wear alone. Hi-Viz lime. One size fits most.
• Rapidly removes Graffiti and Tagging Obscenities!
• Safe, Bio-degradable, Non-toxic, Non-Caustic and Non-Flammable!
• Will Not Run Off Vertical Surface!
• Originally developed for Public Works Departments and State DOT’S
Works on:
• Street Safety Signs
• Bridges
• Restroom Privacy Panels
• Tile
• Metal, Brick, and Sided Buildings
• Plastic Playground Equipment
• Concrete Walls
• Railroad Cars
• Trees
• Rocks
First Impressions are lasting Impressions! If you are responsible for removing graffiti, you know how frustrating and expensive this task can be. Whether you are a governmental agency, a facility manager or a maintenance supervisor and you need to remove a simple declaration of love or a gang symbol, using TAGSTER will solve your problem. TAGSTER is extremely versatile and can be used on variety of different surfaces like metal, concrete, wood, and plastic. TAGSTER was originally developed for Public Works Departments and State DOT’S who have been plagued for years by vandals that spray paint, obscenities, crude language and declarations of love on buildings, equipment, traffic signs, restrooms, playground equipment and bridge embankments.
This lime Hi- Viz Boonie Hat with orange trim is ANSI 107-Class Headwear. Polyester woven 300D oxford with PU coating. Mesh venting. 1" reflective tape. One size fits all, circumference is 24".
• All Plastic Sign Frame
• Regressed sign area helps to protect sign faces
• Features “click lock” hinges for a positive interlock in the open position>
• Can be internally ballasted with sand
• Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces
• Outside Dimensions: 45”H X 25”W x 3”D
• Weight: 18.5 lbs (28.5 lbs. with sand)
The most cost effective way to advertise events, direct traffic or alert students of important information. Just attach your own 24" x 36" poster or sign with screws, or purchase our SA872P Changeable Message Sign Kit (sold separately). Overall Size 25" wide x 45" high. Sign regress of 24" wide x 36" high. Patented Locking Hinge Keeps Message Board Open. Hole with plug for sand ballasting. Unit weighs 18.5 lbs (28.5 lbs. with sand). Stacking lugs assure no sliding and scratching during shipping. Available only in white.Does not qualify for free shipping.
Hollow, soft, lime glass. Uniform in size and quality. For general lab use. Cut in convenient 24 inch lengths.
• Multi-function flash settings
• Elastic arm band included
• Weather sealed case
• Requires 2 "AA" Batteries (not included).
• Replacement light for SA916M
Available lighting styles:
- All LEDs on
- All LEDs flashing fast
- All LEDs flashing slow
- LEDs flashing in left-to-right pattern
- LEDs flashing in right-to-left pattern
- LEDs flashing fast in left-to-right pattern
- LEDs flashing in back-and-forth pattern
- All LEDs off
This red pinnie with SAFETY PATROL emblem screened on both sides is constructed of nylon and stitched at edges to prevent fraying. Completely washable. 44" x 11 1/2" size. Elastic waist strap allows fit for all sizes.
Glassware is manufactured from low alkali Type 3.3 borosilicate glass. It is virtually free of magnesia-lime-zinc group and is completely free of arsenic and other heavy metals.
• Perforated sides for cross-ventilation and maximum air circulation
• Moisture-wicking brow pad. Easily removable for replacement or washing
• Suspension pin-lock sizing adjusts for head sizes ranging 6.5 to 7.75
• Available in 4 colors
• With or without SCHOOL SAFETY PATROL label
• Does not meet ANSI/ISEA Z89.1 requirements
These bright helmets weigh only 7 oz. and have size adjusts from 6 1/2 to 7 3/4. Ideal for protecting head from lacerations, minor bumps and bruises in areas that do not require certified safety helmets. 4-point injection-molded suspension. Perforated sides for cross-ventilation and maximum air circulation. Moisture-wicking brow pad. Easily removable for replacement or washing.
Available in 4 colors with or without SCHOOL SAFETY PATROL label. Does not meet ANSI/ISEA Z89.1 requirements.
- Protects from minor bumps, such as walking into low door frames or signs.
- Enhances visibility and authority for students directing traffic or helping at crosswalks.
- Offers protection from accidental head contact in tight spaces.
- Can be color-coded to designate roles at assemblies, or community events.
- Helps reduce the chance of minor head injuries during setup or takedown.
- Helps protect against accidental contact in low clearance areas.
- Provides a visible, protective head covering for those managing drop-off zones.
12" Wide x 13 1/4" Long Printed on One Side These directional reinforcement devices give supplemental standard warnings and directions creating safer traffic control in the school area. Installs in seconds and firmly locks in place. Reusable, All-weather ABS plastic with UV. Used by thousands of schools, cities and utility companies.
All you need is water, a little sunshine and imagination for hours of fun making photographic type prints, available in 2 sizes. 4" x 4", 10 sheets, 1 acrylic plate and instructions in a lightproof envelope.
Contains 4" x 4" sheets of sunprint paper and an acrylic overlay. This acrylic overlay helps press objects such as leaves flat in contact with the paper to insure a good print.
Developed by educators at the Lawrence Hall of Science, Sunprints encourage an interest in the photographic process using only sun, water, and a bit of imagination.
Place a leaf, flower, or other object on the special paper and set it in the sun briefly.
Then rinse the paper in water and watch as a beautiful long-lasting image appears.
• One of our most popular vests for over 20 years
• Durable Vinyl coated mesh
• Hook/loop side closures
• Reflective panels front & back
• CROSSING GUARD printed on front and back
Absolutely the finest safety vest on the market. Durable fluorescent orange woven vinyl-coated with Reflexite Prismatic tape front and back with printed legend CROSSING GUARD. Vertical stripes over shoulders and on hook-and-loop adjustable belts provide 360 degrees of reflective visibility. Hoop-and-loop front closure.
• Front and back of the vest is 18 inches across from side to side
• 12 inch belts on each side for adjustability
• Measures 48 inches from bottom hem on the front across the shoulders to bottom hem on the back
• Injection molded traffic cones don’t stick together
• Patented interlocking design secures fluorescent portion of hazard cone to recycled black base
• Brilliant fluorescent lime cones with UV inhibitors to resist fading
• Superior flexibility in heat and cold
• Bounce back from an impact
• Recycled black base traffic cones look clean despite heavy use
• Available in 3 sizes
18" high with 11" square base
28" high with 14" square base
36" high with 14" square base
These Injection molded traffic cones won't stick together! Patented interlocking design secures fluorescent portion of hazard cone to recycled black base. Brilliant fluorescent lime cones with UV inhibitors to resist fading. Superior flexibility in heat and cold - PVC is better than rubber traffic cones and pylons, since it can instantly bounce back from an impact. The recycled black base keeps your cone looking clean despite heavy use, being run over, and tar stains!
These 4" wide Vinyl, pressure-sensitive, die-cut circles come ready to apply. Sold in rolls of 100 in 5 colors. Colors may vary slightly from colors shown.
These sturdy Jars features a wide mouth and are ideal for storing powders and solid specimens. Cap features an insert for a tight, leak-proof closure. Material: HDPE.
• Red with white ink
• Heavyweight 50/50 fabric
• Durable fabric
• Full cut for a comfortable fit
• Screened front only
• Youth sizes: S (6-8), M (10-12) or L (14-16)
Red with white ink. Heavyweight 50/50 fabric. Durable fabric, full cut for a comfortable fit. Screened front only. Specify size. Youth sizes: S (6-8), M (10-12) or L (14-16).
Made of brushed aluminum. Gives a fixed tone when struck. Key: C. Frequency: 512.
Made of brushed aluminum. Gives a fixed tone when struck. Key: C. Frequency: 512.
• Perfect for parking lots, crosswalks, and pedestrian walkways
• Can be used with any size PVC traffic cone
• In an immediate situation, deploy a bar - placed between two traffic cones
• Use to create a quick and temporary visible barrier
• Bar expands from 3.35' to 6.6'
• Includes two rings for hanging any of our 24" x 8" plastic signs shown below
• Color: Yellow/Black, Red/White or Orange/White
The Retractable Cone Bar is perfect for parking lots, crosswalks, and pedestrian walkways. The Retractable Cone Bar can be used with any size PVC traffic cone. In an immediate situation, deploy a bar and place it between two traffic cones to create a quick and temporary visible barrier. Cone Bar expands from 3.35' to 6.6'. Retractable Cone Bar includes two rings for hanging any of our 24" x 8" plastic signs.
High visibility orange vinyl with Silver 3M Scotchlite Reflective Material . High visibility day or night. Fully Adjustable to Fit Men or Women. Waist size 30" to 45" and two over the shoulder straps 23.5" to 46.5".
Convert our SA869P A-frame sign into a 2-sided message board sign; displays 7 lines of copy. Contains: 2 large (24" x 36") white sign face with letter tracks,1 - Set of 314- 4" black letters and 4" red numbers and symbols, 1 - Set of 22- 8" red numbers 1 - Set of 2 double-sided header cards, "Sales" and "Special" (red).
• Perfect for the classroom, gym or playground
• Made of styrene to last
• Easily fits our cone top sign holders
• Set of 5 - 1-Way (right & left), RR Xing, No parking, crosswalk.
Set of 5 - 1-Way (right & left), RR Xing, No parking, crosswalk. Perfect for the classroom, gym or playground. Made of styrene to last. Easily fits our cone top sign holders.