These 25ml to 1000ml beakers are molded in polypropylene, have excellent clarity and very good chemical resistance. These autoclavable beakers have prominently raised graduations on the outer surface. Pouring a solution is easy because of its tapered spout.
Maximum Use Temperature = 135°C
Crystal clear PMP Plastic, autoclavable beakers feature excellent chemical resistance. Permanent graduations are molded in. Manufactured per ISO standard 7056-1981 (E), beakers have stated tolerance of +/- 10%. Available in 6 sizes.
Maximum Use Temperature = 175°C
This Borosilicate glass beaker is ideal for heating because of optimum balance between thermal resistance and mechanical resistance achieved from controlled wall thickness at the sides radius and bottom. Spout is designed for easy pouring.
This borosilicate (heat resistant) glass conical shaped flask with side arm is used in filtration processes.
100 ml Flask uses a size 4 stopper
150 ml Flask uses a size 5 stopper
250 ml Flask uses a size 6.5 stopper
500 ml Flask uses a size 6.5 stopper
Boiling flask with round bottom, borosilicate (heat resistant) glass, used in the laboratory for more prolonged boiling of liquids. Available in 4 sizes.
100 ml Flask uses a size 4 stopper
150 ml Flask uses a size 5 stopper
250 ml Flask uses a size 6.5 stopper
500 ml Flask uses a size 6.5 stopper
Stopper not included.
Standard Conical shaped flasks, in seven sizes, borosilicate (heat resistant) glass, marked with graduations for approximate volumes, used in the laboratory for mixing, storing and heating of liquids.
50 ml flask uses a size 1 stopper
150 ml flask uses a size 5 stopper
250 ml flask uses a size 6.5 stopper
500 ml flask uses a size 6.5 stopper
1000 ml flask uses a size 9 stopper
Stoppers not included.
These polypropylene bottles are rigid, translucent and have excellent contact clarity. These bottles can be autoclaved filled as well when they are empty. The polypropylene cap has a built-in seal ring to make these bottles leak proof. Avaialble in 5 sizes.
| Size | Height | Neck Diameter ID/OD |
Pack Size |
| 60ml | 72mm | 17mm / 22mm | Pack of 12 |
| 125ml | 110mm | 16.5mm / 20mm | Pack of 12 |
| 250ml | 139mm | 20mm / 25mm | Pack of 12 |
| 500ml | 165mm | 20mm / 25mm | Pack of 12 |
| 1000ml | 222mm | 20mm / 25mm | Pack of 6 |
These polypropylene bottles are rigid, translucent and have excellent contact clarity. These bottles can be autoclaved filled as well as empty. The polypropylene cap has a built-in seal ring to make these bottles leak proof.
| Size | Height | Neck Diameter ID/OD |
Pack Size |
| 60ml | 73mm | 20mm / 25mm |
Pack of 12
|
| 125ml | 100mm | 27mm / 32mm |
Pack of 12
|
| 250ml | 137mm | 35mm / 41mm |
Pack of 12
|
| 500ml | 149mm |
35mm / 41mm |
Pack of 12
|
|
1000ml
|
218mm |
35mm / 41mm |
Pack of 6
|
• Polyethylene bottle with polypropylene cap
• Excellent chemical resistance
• Features sealing plugs for leak-proof closure.
• Easy grip caps can be wired down for security.
• Head space between cap and insert plug can be used for confidential notes.
100ml Polyethylene bottle with polypropylene cap. Polyethylene bottles provide excellent chemical resistance and feature sealing plugs for leak-proof closure. Easy grip caps can be wired down for security. Head space between cap and insert plug can be used for confidential notes.
Polypropylene Space saving, graduated bottles are ideal for long-term storage of samples. Easy grip caps can be wired down for security. Head space between cap and insert plug can be used for confidential notes.
These sturdy Jars features a wide mouth and are ideal for storing powders and solid specimens. Cap features an insert for a tight, leak-proof closure. Material: HDPE.
This Type 1 (DIN# GL-45) Borosilicate Glass, general purpose media bottle is autoclavable with permanent white imprinted graduations and marking spots. The screw thread opening has an ID of approximately 300m. The supplied cap is liner-less and both the cap and drip free ring are polypropylene autoclavable to 140 degrees Celsius (284 degrees Fahrenheit).
Glassware is manufactured from low alkali Type 3.3 borosilicate glass. It is virtually free of magnesia-lime-zinc group and is completely free of arsenic and other heavy metals.
These durable test tubes with caps are plastic 16 ml
These long stem funnels have smooth walls, 60 degree one cone angle and external ribs to prevent air lock. Molded in polypropylene, these clear funnels can also be steam autoclaved.
Available in 5 Sizes
55mm - Top Inside Diameter: 50mm, Stem Length: 39mm
65mm - Top Inside Diameter: 61mm, Stem Length: 65mm
75mm - Top Inside Diameter: 74mm, Stem Length: 69mm
100mm - Top Inside Diameter: 93mm, Stem Length: 84mm
150mm - Top Inside Diameter: 148mm, Stem Length: 125mm
Glazed porcelain, one-piece construction. With fixed perforated plate. Straight sides with tapered stem.
Borosilicate glass. Uniform thickness.
This is a standard borosilicate glass funnel with uniform thickness. The top outer diameter measures 54mm and the stem measures 50mm. Glass funnels are mostly inert and make it easier to pour without making a mess.
Borosilicate glass. Uniform thickness.
This is a standard borosilicate glass funnel with uniform thickness. The top outer diameter measures 74mm and the stem measures 70mm. Glass funnels are mostly inert and make it easier to pour without making a mess.
Neutral glass. Uniform thickness. Available in 3 sizes.
For one funnel. Attaches to ring stand to support funnel.
3" glass pipet with rubber bulb, straight.
3" glass "medicine dropper" with rubber bulb.
Our Glass Dropping Pipettes consist of a glass tube attached to a 5ml bulb. Sold in packs of 12. Bulb color may vary.
Borosil brand pipettes are manufactured from specially selected heavy-wall machine-drawn borosilicate accurate bore glass tubing. They have precision formed jets and bevel ground ends to resist chipping. The graduation marks are in durable white enamel or amber stain, both are resistant to normal laboratory agents and repeated washing. All the pipettes are individually measured and then marked. Accuracy is ensured between any two readings, because of uniformity of bore. The pipettes can be autoclaved and if necessary can be flamed for sterilization.