• Clear molded polypropylene pitchers
• Autoclavable
• Good chemical resistance
• Handles for easy and convenient lifting
• Raised graduations
• Top Flange
• Diameter: 83mm,
• Height: 99mm,
• Graduated Interval: 10ml
• Pack of 12
| 250ml | 500ml | 1000ml | 2000ml | |
|
Top Flange Diameter: Height: Graduated Interval: Pack Quantity: |
83mm 99mm 10ml Pack of 12 |
97mm 126mm 10ml Pack of 12 |
114mm 170mm 10ml Pack of 6 |
150mm 212mm 20ml Pack of 6 |
These handy molded polypropylene pitchers, are clear, autoclavable and have good chemical resistance. They have a handle for easy and convenient lifting, and feature raised graduations. Available in 4 sizes.
Maximum Use Temperature = 135°C
These 25ml to 1000ml beakers are molded in polypropylene, have excellent clarity and very good chemical resistance. These autoclavable beakers have prominently raised graduations on the outer surface. Pouring a solution is easy because of its tapered spout.
Maximum Use Temperature = 135°C
Crystal clear PMP Plastic, autoclavable beakers feature excellent chemical resistance. Permanent graduations are molded in. Manufactured per ISO standard 7056-1981 (E), beakers have stated tolerance of +/- 10%. Available in 6 sizes.
Maximum Use Temperature = 175°C
This borosilicate (heat resistant) glass conical shaped flask with side arm is used in filtration processes.
100 ml Flask uses a size 4 stopper
150 ml Flask uses a size 5 stopper
250 ml Flask uses a size 6.5 stopper
500 ml Flask uses a size 6.5 stopper
Standard Conical shaped flasks, in seven sizes, borosilicate (heat resistant) glass, marked with graduations for approximate volumes, used in the laboratory for mixing, storing and heating of liquids.
50 ml flask uses a size 1 stopper
150 ml flask uses a size 5 stopper
250 ml flask uses a size 6.5 stopper
500 ml flask uses a size 6.5 stopper
1000 ml flask uses a size 9 stopper
Stoppers not included.
These polypropylene bottles are rigid, translucent and have excellent contact clarity. These bottles can be autoclaved filled as well when they are empty. The polypropylene cap has a built-in seal ring to make these bottles leak proof. Avaialble in 5 sizes.
| Size | Height | Neck Diameter ID/OD |
Pack Size |
| 60ml | 72mm | 17mm / 22mm | Pack of 12 |
| 125ml | 110mm | 16.5mm / 20mm | Pack of 12 |
| 250ml | 139mm | 20mm / 25mm | Pack of 12 |
| 500ml | 165mm | 20mm / 25mm | Pack of 12 |
| 1000ml | 222mm | 20mm / 25mm | Pack of 6 |
These polypropylene bottles are rigid, translucent and have excellent contact clarity. These bottles can be autoclaved filled as well as empty. The polypropylene cap has a built-in seal ring to make these bottles leak proof.
| Size | Height | Neck Diameter ID/OD |
Pack Size |
| 60ml | 73mm | 20mm / 25mm |
Pack of 12
|
| 125ml | 100mm | 27mm / 32mm |
Pack of 12
|
| 250ml | 137mm | 35mm / 41mm |
Pack of 12
|
| 500ml | 149mm |
35mm / 41mm |
Pack of 12
|
|
1000ml
|
218mm |
35mm / 41mm |
Pack of 6
|
Versatile, polypropylene containers are graduated in ounces and milliliters. Graduated to 2 ounces.
This Type 1 (DIN# GL-45) Borosilicate Glass, general purpose media bottle is autoclavable with permanent white imprinted graduations and marking spots. The screw thread opening has an ID of approximately 300m. The supplied cap is liner-less and both the cap and drip free ring are polypropylene autoclavable to 140 degrees Celsius (284 degrees Fahrenheit).
These plug caps for test tubes are high grip hollow made of low density polyethylene. Hollow caps makes insertion and removal from test tubes easy. Sold in packs of 500.
These long stem funnels have smooth walls, 60 degree one cone angle and external ribs to prevent air lock. Molded in polypropylene, these clear funnels can also be steam autoclaved.
Available in 5 Sizes
55mm - Top Inside Diameter: 50mm, Stem Length: 39mm
65mm - Top Inside Diameter: 61mm, Stem Length: 65mm
75mm - Top Inside Diameter: 74mm, Stem Length: 69mm
100mm - Top Inside Diameter: 93mm, Stem Length: 84mm
150mm - Top Inside Diameter: 148mm, Stem Length: 125mm
Glazed porcelain, one-piece construction. With fixed perforated plate. Straight sides with tapered stem.
One piece, made from Low Density Polyetylene, graduated liquid transfer pipets. Chemically Inert and non-toxic. Can be heat-sealed to transport or store. For use in all types of testing laboratories, chemistry, microbiology, blood banking, urinalysis and hematology. Non-Sterile. Two sizes to choose from.
|
Capacity: 5.0 ml Drops per mL: 23 Stem Diameter: 5mm Bulb Draw: 3.5 ml Stem Graduations: 1.0 ml x 0.25 ml Total Length: 150mm |
Capacity: 7.0 ml Drops per mL: 21 Stem Diameter: 5mm Bulb Draw: 3.5 ml Stem Graduations: 3.0 ml x 0.5 ml Total Length: 160mm |
A necessity for those working with liquid substances. Accurate, high quality, and disposable! A cost-effective way to transfer liquids without worries of cross-contamination or spillage. One piece, made from Low Density Polyetylene, graduated liquid transfer pipets. Chemically Inert and non-toxic. Can be heat-sealed to transport or store. For use in all types of testing laboratories, chemistry, microbiology, blood banking, urinalysis and hematology. Sold in packs of 500 pipettes.
Our Glass Dropping Pipettes consist of a glass tube attached to a 5ml bulb. Sold in packs of 12. Bulb color may vary.
Borosil brand pipettes are manufactured from specially selected heavy-wall machine-drawn borosilicate accurate bore glass tubing. They have precision formed jets and bevel ground ends to resist chipping. The graduation marks are in durable white enamel or amber stain, both are resistant to normal laboratory agents and repeated washing. All the pipettes are individually measured and then marked. Accuracy is ensured between any two readings, because of uniformity of bore. The pipettes can be autoclaved and if necessary can be flamed for sterilization.
Griffin type. Made of Zinc alloy. Die cast. Nickel plated. Cuts tubing up to 38mm (1 1/2") diameter. Spring loaded to stay open.
These Borosilicate Glass Liebig Condensers find wide usage in the laboratory such as distillation, reflux operations, extraction etc. Sealed inner tube, large capacity of water jacket gives efficient cooling. Sized by effective length. 22 mm diameter.
• Kjeldahl Bulb with #2 Stopper
• Borosilicate glass
• Sold in eaches
• Easy handling
• Efficient
Kjeldahl Bulb w/ Stoppers
These high density polyethylene powder funnels feature wide short 20mm stems.
|
Material: Top Outside: Stem Length: Capacity: |
HDPE 65mm 20mm 35ml |
Polypropylene 85mm 30mm 100ml |
Polypropylene 125mm 40mm 300ml |
Kimax® flasks for economy and versatility. These flasks are the choice for general laboratory usage. Tops are reinforced and tooled with a rounded finish, containing more glass to give them maximum mechanical strength. Body is thick-walled, with a long tapered outside contour to minimize chipping when struck or rubbed together. All flasks have durable white ceramic enamel scales to indicate approximate volumes at various levels, useful in measuring and mixing solutions where a high degree of accuracy is not necessary. Designed from ASTM Specification E1404, Type I, Class I requirements. Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements.
Features
- Complies with ASTM Specification E1404, Type I, Class I requirements
- Manufactured from borosilicate glass 3.3
- Tops are reinforced and tooled with a rounded finish
- Durable ceramic enamel markings indicate approximate volumes at various levels
500 ml flask uses a size 7 stopper
Stoppers not included.