All you need is water, a little sunshine and imagination for hours of fun making photographic type prints, available in 2 sizes. 4" x 4", 10 sheets, 1 acrylic plate and instructions in a lightproof envelope.
Contains 4" x 4" sheets of sunprint paper and an acrylic overlay. This acrylic overlay helps press objects such as leaves flat in contact with the paper to insure a good print.
Developed by educators at the Lawrence Hall of Science, Sunprints encourage an interest in the photographic process using only sun, water, and a bit of imagination.
Place a leaf, flower, or other object on the special paper and set it in the sun briefly.
Then rinse the paper in water and watch as a beautiful long-lasting image appears.
Pulley is high-quality impact-resistant, chip-proof injection molded, balanced wheel. Smooth, clean V-groove. Wheel diameter 2", 360 degrees swivel hooks-top and bottom. All steel blocks.
Easy wind-up tapes are marked in inches and feet on one side and mm and cm on the other. Durable casing for years of use.
Easy wind-up tapes are marked in inches and feet on one side and mm and cm on the other. Durable casing for years of use.
Mounted on solid plastic base. Measuring 11cmx5cm.
Mounted on solid plastic base. Measuring 11cmx5cm.
Made of polypropylene, this autoclavable, unbreakable and non-corrosive basket is ideal for rinsing and draining glassware. It's also useful for storage of test tubes or culture tubes during sterilization or incubation. Dimensions 160mm x 160mm x 160mm.
White nylon test tube brush. Radial end. 9" long.
White nylon test tube brush. Radial end. 9" long.
Self-closing with rectangular jaw made of brass wire. 5" long. Will hold up to 1" diameter tubes (25mm)
Self-closing with rectangular jaw made of brass wire. 5" long. Will hold up to 1" diameter tubes (25mm)
Partial Immersion, Double Scale Range -20/110 degrees C and 0/230 degrees F, Scale: 1 Degree C, 2 Degree F, 300mm Length Partial immersion is best for most applications. These thermometers are calibrated to read correctly when only 3" of the stem is immersed in the liquid being measured. Total immersion thermometers are calibrated for use when the entire liquid column is totally immersed in the substance being measured and should be used under those circumstances. All of our thermometers are made to SAMA specifications for ranges and accuracy. In addition, each of our thermometers has a number of extra quality features built into each one: REINFORCED BULBS, to prevent breakage, RING TOPS, for submersion, NON ROLL CAPS, SCALES PRINTED INTO THE GLASS, rather than on the surface so they never wear off.
Partial Immersion, Double Scale Range -20/110 degrees C and 0/230 degrees F, Scale: 1 Degree C, 2 Degree F, 300mm Length Partial immersion is best for most applications. These thermometers are calibrated to read correctly when only 3" of the stem is immersed in the liquid being measured. Total immersion thermometers are calibrated for use when the entire liquid column is totally immersed in the substance being measured and should be used under those circumstances. All of our thermometers are made to SAMA specifications for ranges and accuracy. In addition, each of our thermometers has a number of extra quality features built into each one: REINFORCED BULBS, to prevent breakage, RING TOPS, for submersion, NON ROLL CAPS, SCALES PRINTED INTO THE GLASS, rather than on the surface so they never wear off.
Partial Immersion, Single Scale Range -20/110 degrees C, Scale: 1 Degree, 300mm Length Partial immersion is best for most applications. These thermometers are calibrated to read correctly when only 3" of the stem is immersed in the liquid being measured. Total immersion thermometers are calibrated for use when the entire liquid column is totally immersed in the substance being measured and should be used under those circumstances. All of our thermometers are made to SAMA specifications for ranges and accuracy. In addition, each of our thermometers has a number of extra quality features built into each one: REINFORCED BULBS, to prevent breakage, RING TOPS, for submersion, NON ROLL CAPS, SCALES PRINTED INTO THE GLASS, rather than on the surface so they never wear off.
Partial Immersion, Single Scale Range -20/110 degrees C, Scale: 1 Degree, 300mm Length Partial immersion is best for most applications. These thermometers are calibrated to read correctly when only 3" of the stem is immersed in the liquid being measured. Total immersion thermometers are calibrated for use when the entire liquid column is totally immersed in the substance being measured and should be used under those circumstances. All of our thermometers are made to SAMA specifications for ranges and accuracy. In addition, each of our thermometers has a number of extra quality features built into each one: REINFORCED BULBS, to prevent breakage, RING TOPS, for submersion, NON ROLL CAPS, SCALES PRINTED INTO THE GLASS, rather than on the surface so they never wear off.
Partial Immersion, Single Scale Range -20/150 degrees C, Scale: 1 Degree, 300mm Length Partial immersion is best for most applications. These thermometers are calibrated to read correctly when only 3" of the stem is immersed in the liquid being measured. Total immersion thermometers are calibrated for use when the entire liquid column is totally immersed in the substance being measured and should be used under those circumstances. All of our thermometers are made to SAMA specifications for ranges and accuracy. In addition, each of our thermometers has a number of extra quality features built into each one: REINFORCED BULBS, to prevent breakage, RING TOPS, for submersion, NON ROLL CAPS, SCALES PRINTED INTO THE GLASS, rather than on the surface so they never wear off.
Partial Immersion, Single Scale Range -20/150 degrees C, Scale: 1 Degree, 300mm Length Partial immersion is best for most applications. These thermometers are calibrated to read correctly when only 3" of the stem is immersed in the liquid being measured. Total immersion thermometers are calibrated for use when the entire liquid column is totally immersed in the substance being measured and should be used under those circumstances. All of our thermometers are made to SAMA specifications for ranges and accuracy. In addition, each of our thermometers has a number of extra quality features built into each one: REINFORCED BULBS, to prevent breakage, RING TOPS, for submersion, NON ROLL CAPS, SCALES PRINTED INTO THE GLASS, rather than on the surface so they never wear off.
Total Immersion, Double Scale Range -20/110 degrees C and 0/230 degrees F, Scale: 1 Degree C, 2 Degree F, 300mm Length Partial immersion is best for most applications. These thermometers are calibrated to read correctly when only 3" of the stem is immersed in the liquid being measured. Total immersion thermometers are calibrated for use when the entire liquid column is totally immersed in the substance being measured and should be used under those circumstances. All of our thermometers are made to SAMA specifications for ranges and accuracy. In addition, each of our thermometers has a number of extra quality features built into each one: REINFORCED BULBS, to prevent breakage, RING TOPS, for submersion, NON ROLL CAPS, SCALES PRINTED INTO THE GLASS, rather than on the surface so they never wear off.
Total Immersion, Double Scale Range -20/110 degrees C and 0/230 degrees F, Scale: 1 Degree C, 2 Degree F, 300mm Length Partial immersion is best for most applications. These thermometers are calibrated to read correctly when only 3" of the stem is immersed in the liquid being measured. Total immersion thermometers are calibrated for use when the entire liquid column is totally immersed in the substance being measured and should be used under those circumstances. All of our thermometers are made to SAMA specifications for ranges and accuracy. In addition, each of our thermometers has a number of extra quality features built into each one: REINFORCED BULBS, to prevent breakage, RING TOPS, for submersion, NON ROLL CAPS, SCALES PRINTED INTO THE GLASS, rather than on the surface so they never wear off.
Total Immersion, Single Scale Range -20/110 degrees C, Scale: 1 Degree, 300mm Length Partial immersion is best for most applications. These thermometers are calibrated to read correctly when only 3" of the stem is immersed in the liquid being measured. Total immersion thermometers are calibrated for use when the entire liquid column is totally immersed in the substance being measured and should be used under those circumstances. All of our thermometers are made to SAMA specifications for ranges and accuracy. In addition, each of our thermometers has a number of extra quality features built into each one: REINFORCED BULBS, to prevent breakage, RING TOPS, for submersion, NON ROLL CAPS, SCALES PRINTED INTO THE GLASS, rather than on the surface so they never wear off.
Total Immersion, Single Scale Range -20/110 degrees C, Scale: 1 Degree, 300mm Length Partial immersion is best for most applications. These thermometers are calibrated to read correctly when only 3" of the stem is immersed in the liquid being measured. Total immersion thermometers are calibrated for use when the entire liquid column is totally immersed in the substance being measured and should be used under those circumstances. All of our thermometers are made to SAMA specifications for ranges and accuracy. In addition, each of our thermometers has a number of extra quality features built into each one: REINFORCED BULBS, to prevent breakage, RING TOPS, for submersion, NON ROLL CAPS, SCALES PRINTED INTO THE GLASS, rather than on the surface so they never wear off.
Total Immersion, Single Scale Range -20/150 degrees C, Scale: 1 Degree, 300mm Length Partial immersion is best for most applications. These thermometers are calibrated to read correctly when only 3" of the stem is immersed in the liquid being measured. Total immersion thermometers are calibrated for use when the entire liquid column is totally immersed in the substance being measured and should be used under those circumstances. All of our thermometers are made to SAMA specifications for ranges and accuracy. In addition, each of our thermometers has a number of extra quality features built into each one: REINFORCED BULBS, to prevent breakage, RING TOPS, for submersion, NON ROLL CAPS, SCALES PRINTED INTO THE GLASS, rather than on the surface so they never wear off.
Total Immersion, Single Scale Range -20/150 degrees C, Scale: 1 Degree, 300mm Length Partial immersion is best for most applications. These thermometers are calibrated to read correctly when only 3" of the stem is immersed in the liquid being measured. Total immersion thermometers are calibrated for use when the entire liquid column is totally immersed in the substance being measured and should be used under those circumstances. All of our thermometers are made to SAMA specifications for ranges and accuracy. In addition, each of our thermometers has a number of extra quality features built into each one: REINFORCED BULBS, to prevent breakage, RING TOPS, for submersion, NON ROLL CAPS, SCALES PRINTED INTO THE GLASS, rather than on the surface so they never wear off.
The thistle funnel may be used to add liquid into laboratory glassware among many other uses. Made from borosilicate glass.
Specificiations:
Funnel
Outside Diameter: 18mm
Inside Diameter: 16mm
Length: 1.33 Inch (37mm)
Stem
Outside Diameter: 6mm
Inside Diameter: 4mm
Length: 7 Inch (180mm)
Overall Length: 8.5 Inch (215mm)
The thistle funnel may be used to add liquid into laboratory glassware among many other uses. Made from borosilicate glass.
Specifications:
Funnel:
• Outside Diameter: 25mm
• Inside Diameter: 23mm
• Length: 1.8 Inch (46mm)
Stem:
• Outside Diameter: 7mm
• Inside Diameter: 4mm
• Length: 12 Inch (300mm)
Overall Length: 13.8 Inch (350mm)
The thistle funnel may be used to add liquid into laboratory glassware among many other uses. Made from borosilicate glass.
10" long, prongs covered with rubber tubing.
10" long, prongs covered with rubber tubing.
Just attach a discarded plastic soda bottle to each end of the Tornado Tube, one with water, one empty. Stand the empty bottle on a flat surface, as the water begins to flow down from the full bottle, a vortex will descend from the top with an amazing similarity to a tornado. Bottles not included.
Clear acrylic trapezoid. With one flat surface frosted to enhance visibility. Bases are 89mm and 40mm. Faces measure 47mm and 35mm.
Clear acrylic trapezoid. With one flat surface frosted to enhance visibility. Bases are 89mm and 40mm. Faces measure 47mm and 35mm.
Handy molded plastic magnifier has 2x,6x and 8x magnification lenses.
Two optically ground 1" double convex polished lenses fitted into black plastic threaded lens mount. Screw-in metal tripod stand. Black finish. Magnifies approximately 10 times.
Two optically ground 1" double convex polished lenses fitted into black plastic threaded lens mount. Screw-in metal tripod stand. Black finish. Magnifies approximately 10 times.
Easily operated with one hand. One piece plastic construction. Won't rust or corrode. For Tubing OD up to 1/4"
Made of brushed aluminum. Gives a fixed tone when struck. Key: C. Frequency: 512.
Made of brushed aluminum. Gives a fixed tone when struck. Key: C. Frequency: 512.
• Personal Protective Equipment
• Eye Protection
• Bouton Goggles
Soft vinyl frame with 184 perforations for maximum ventilation. Optical quality, distortion free lenses. Adjustable elastic band. Easily fits over glasses. One size fits all.