• All Plastic Sign Frame
• 12in x 24in legend area
• Has "Slow Down" printed on both sides
• Regressed sign area helps to protect sign faces
• Features “click lock” hinges for a positive interlock in the open position
• Can be internally ballasted with sand
• Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces
• Outside Dimensions: 36”H X 13”W x 3”D
• Weight: 10 lbs.
Molded all plastic hollow sign frame that can be internally weighted down with sand. Only 3 or 4 pounds is recommended per leg. Most of the weight is at the bottom where it acts like an anchor. They are extremely durable. Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces. Features “click lock” hinges for a positive interlock in the open position. Legend area measure 12in x 24in. “Slow Down“ printed on both sides. Outside Dimensions: 36”H X 13”W x 3”D. Weight: 10 lbs. Ships UPS or FedEx Ground.
• All Plastic Sign Frame
• 12in x 24in legend area
• Has "Staff Parking" printed on both sides
• Regressed sign area helps to protect sign faces
• Features “click lock” hinges for a positive interlock in the open position
• Can be internally ballasted with sand
• Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces
• Outside Dimensions: 36”H X 13”W x 3”D
• Weight: 10 lbs.
Molded all plastic hollow sign frame that can be internally weighted down with sand. Only 3 or 4 pounds is recommended per leg. Most of the weight is at the bottom where it acts like an anchor. They are extremely durable. Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces. Features “click lock” hinges for a positive interlock in the open position. Legend area measure 12in x 24in. “Staff Parking“ printed on both sides. Outside Dimensions: 36”H X 13”W x 3”D. Weight: 10 lbs. Ships UPS or FedEx Ground.
• All Plastic Sign Frame
• 12in x 24in legend area
• Has "STOP" printed on both sides
• Regressed sign area helps to protect sign faces
• Features “click lock” hinges for a positive interlock in the open position
• Can be internally ballasted with sand
• Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces
• Outside Dimensions: 36”H X 13”W x 3”D
• Weight: 10 lbs.
Molded all plastic hollow sign frame that can be internally weighted down with sand. Only 3 or 4 pounds is recommended per leg. Most of the weight is at the bottom where it acts like an anchor. They are extremely durable. Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces. Features “click lock” hinges for a positive interlock in the open position. Legend area measure 12in x 24in. “STOP“ printed on both sides. Outside Dimensions: 36”H X 13”W x 3”D. Weight: 10 lbs. Ships UPS or FedEx Ground.
• All Plastic Sign Frame
• 12in x 24in legend area
• Has "Stop, Do Not Enter" printed red on white on both sides
• Regressed sign area helps to protect sign faces
• Features “click lock” hinges for a positive interlock in the open position
• Can be internally ballasted with sand
• Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces
• Outside Dimensions: 36”H X 13”W x 3”D
• Weight: 10 lbs.
Molded all plastic hollow sign frame that can be internally weighted down with sand. Only 3 or 4 pounds is recommended per leg. Most of the weight is at the bottom where it acts like an anchor. They are extremely durable. Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces. Features “click lock” hinges for a positive interlock in the open position. Legend area measure 12in x 24in. “Stop, Do Not Enter“ printed red on white on both sides. Outside Dimensions: 36”H X 13”W x 3”D. Weight: 10 lbs. Ships UPS or FedEx Ground.
• All Plastic Sign Frame
• 12in x 24in legend area
• Has "Stop, Do Not Enter" printed on both sides
• Regressed sign area helps to protect sign faces
• Features “click lock” hinges for a positive interlock in the open position
• Can be internally ballasted with sand
• Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces
• Outside Dimensions: 36”H X 13”W x 3”D
• Weight: 10 lbs.
Molded all plastic hollow sign frame that can be internally weighted down with sand. Only 3 or 4 pounds is recommended per leg. Most of the weight is at the bottom where it acts like an anchor. They are extremely durable. Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces. Features “click lock” hinges for a positive interlock in the open position. Legend area measure 12in x 24in. “Stop, Do Not Enter“ printed on both sides. Outside Dimensions: 36”H X 13”W x 3”D. Weight: 10 lbs. Ships UPS or FedEx Ground.
• All Orange Plastic Sign Frame
• 12in x 24in legend area
• Has Engineering Grade orange & white stripes on both sides
• Regressed sign area helps to protect sign faces
• Features “click lock” hinges for a positive interlock in the open position
• Can be internally ballasted with sand
• Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces
• Outside Dimensions: 36”H X 13”W x 3”D
• Weight: 10 lbs.
Molded all plastic hollow sign frame that can be internally weighted down with sand. Only 3 or 4 pounds is recommended per leg. Most of the weight is at the bottom where it acts like an anchor. They are extremely durable. Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces. Features “click lock” hinges for a positive interlock in the open position. Legend area measure 12in x 24in. Engineering Grade orange & white stripes on both sides. Outside Dimensions: 36”H X 13”W x 3”D. Weight: 10 lbs. Ships UPS or FedEx Ground.
• All Plastic Sign Frame
• 12in x 24in legend area
• Has "Student Parking" printed on both sides
• Regressed sign area helps to protect sign faces
• Features “click lock” hinges for a positive interlock in the open position
• Can be internally ballasted with sand
• Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces
• Outside Dimensions: 36”H X 13”W x 3”D
• Weight: 10 lbs.
Molded all plastic hollow sign frame that can be internally weighted down with sand. Only 3 or 4 pounds is recommended per leg. Most of the weight is at the bottom where it acts like an anchor. They are extremely durable. Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces. Features “click lock” hinges for a positive interlock in the open position. Legend area measure 12in x 24in. “Student Parking“ printed on both sides. Outside Dimensions: 36”H X 13”W x 3”D. Weight: 10 lbs. Ships UPS or FedEx Ground.
• All Plastic Sign Frame
• 12in x 24in legend area
• Has "Pull Forward" printed on both sides
• Regressed sign area helps to protect sign faces
• Features “click lock” hinges for a positive interlock in the open position
• Can be internally ballasted with sand
• Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces
• Outside Dimensions: 36”H X 13”W x 3”D
• Weight: 10 lbs.
Molded all plastic hollow sign frame that can be internally weighted down with sand. Only 3 or 4 pounds is recommended per leg. Most of the weight is at the bottom where it acts like an anchor. They are extremely durable. Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces. Features “click lock” hinges for a positive interlock in the open position. Legend area measure 12in x 24in. "Pull Forward" printed on both sides. Outside Dimensions: 36”H X 13”W x 3”D. Weight: 10 lbs. Ships UPS or FedEx Ground.
Made for work, but works for play. A revolutionary 3 layer material that keeps you warm and dry, yet cool and comfortable for 3-season protection. Offers amazing warmth-to-weight ratio in a breathable, wind and water resistant system. Ideal Applications: For use in environments where high visibility and breathability are desired for wearer safety and comfort.
A revolutionary 3 layer material that keeps you warm and dry, yet cool and comfortable for 3-season protection. Offers amazing warmth-to-weight ratio in a breathable, wind and water resistant system.
Ideal Applications: For use in environments where high visibility and breathability are desired for wearer safety and comfort.
• ANSI/ISEA 107 Type R Class 3 compliant jacket for high visibility and breathability.
• Breathable to ASTM E96.
• Athletic apparel design and performance adapted for work environments.
• Inner fleece layer provides warmth and comfort.
• Fluorescent yellow-green background material for excellent daytime visibility.
• 2” silver reflective tape reflects light for 360° nighttime conspicuity.
• Overhead shoulder design for complete freedom of movement.
• Stretch fabric with inner fleece layer for maximum comfort.
• Storm fly front and zipper front closure seal out wind and rain.
• Front hand warmer pockets with zipper closure.
• Right breast security pocket with zipper closure.
• Hook & loop take-up straps on sleeve cuffs for easy adjustment.
• Longer cut back with adjustable elastic drawcord for extra coverage.
• Dark colored front helps conceal dirt.
• Can be zipped into the Icon™ (SS034D) outer shell for insulation.
• Small and Medium sizes have all yellow-green sleeves to meet ANSI 107 requirements.
Outside Diameter: 19mm, Height: 170mm, Graduated Interval: 0.5ml Our Measuring Cylinders are molded as one-piece in polypropylene. These autoclavable cylinders have raised prominent graduations for easy reading and have excellent contact clarity. The broad round base provides good stability.
Outside Diameter: 19mm, Height: 170mm, Graduated Interval: 0.5ml Our Measuring Cylinders are molded as one-piece in polypropylene. These autoclavable cylinders have raised prominent graduations for easy reading and have excellent contact clarity. The broad round base provides good stability.
parkin• 2" high x 10" wide x 6 feet long
• A smart safe investment for your property
• Helps keep speed levels down, reducing costly accidents
• Molded-in color, eliminating costly painting fees
• Easily cleaned to maintain color for increased visibility
• Weighing only 33 lbs., allowing for one person installation
• The 3-bolt anchoring system facilitates relocation
• Made with 100% recycled plastic
• Impervious to road chemicals and corrosion
• Ships UPS or FedEx Ground
These lightweight speed bumps are a smart safe investment for your property. The durable design helps keep speed levels down, reducing costly accidents associated with high speed in your parking facility. Speed bumps have a molded-in color, eliminating costly painting fees. Traffic marks and dirt can be removed with either soap and water or a commercial solvent, helping maintain the bright yellow color for increased visibility. Weighing only 33 lbs., their light weight design allows for one person installation. The 3-bolt anchoring system facilitates relocation when making changes in paving, snow removal and sealcoating. Made with 100% recycled plastic, speed bumps are impervious to road chemicals and corrosion and cost hundreds less than competing alternatives. 2" high x 10" wide x 6 feet long. Ships UPS or FedEx Ground.
To investigate the properties of lenses and to construct simple optical instruments. Kit comprised of the following: Two lamp holders, each in cast alloy shade with two axial slots. Complete with two meter 2-core cable and lamp. Shade has integral support arm which is clamped at right angle to the vertical rod, 165 mm long, fitted on heavy cast base, stove hammer finish. One each right and left hand cylindrical lamp shield of light alloy in matt black finish with slot parallel to the axis, size 190 x 60 mm, Height x Diameter. Two black plastic plates, 100 x 80 mm, with 17 equispaced parallel slots. Two black plastic plates, 130 x 80 mm, each with single and triple slits. Two metal support brackets, matt black finish with spring-loaded clips to hold the plates. Four black finish metal light barriers, height 80 mm. Ten Cylindrical Lens ( 8 plano-convex, and 2 plano-concave ), size 50 x 50 mm, Side x Height. Manual included.
To investigate the properties of lenses and to construct simple optical instruments. Kit comprised of the following: Two lamp holders, each in cast alloy shade with two axial slots. Complete with two meter 2-core cable and lamp. Shade has integral support arm which is clamped at right angle to the vertical rod, 165 mm long, fitted on heavy cast base, stove hammer finish. One each right and left hand cylindrical lamp shield of light alloy in matt black finish with slot parallel to the axis, size 190 x 60 mm, Height x Diameter. Two black plastic plates, 100 x 80 mm, with 17 equispaced parallel slots. Two black plastic plates, 130 x 80 mm, each with single and triple slits. Two metal support brackets, matt black finish with spring-loaded clips to hold the plates. Four black finish metal light barriers, height 80 mm. Ten Cylindrical Lens ( 8 plano-convex, and 2 plano-concave ), size 50 x 50 mm, Side x Height. Manual included.
An economically priced Spectrometer, but capable of performing most of the experiments like spectras, angle of prisms, refractive indexes etc. Consists of heavy base with 170 mm diameter circle, divided 0 to 360 degrees, which rotates independently and has locking screw. Collimator: Fixed, with adjustable axis, objective lens with focusing system, variable aperture slit. Telescope: Moveable with set screw and fine motion screw, adjustable axis. Telescope pillar carries vernier scale for accurate measurements. Focusable objective Lens. Ramsden Eyepiece with cross-wires and locking ring for focus lock. Prism Table: Provided with three leveling screws and engraved lines for prism placement in experiments. Comes complete with Prism Clamp, Grating Holder, Tommy Bar for axis adjustment and Instruction Sheet.
An economically priced Spectrometer, but capable of performing most of the experiments like spectras, angle of prisms, refractive indexes etc. Consists of heavy base with 170 mm diameter circle, divided 0 to 360 degrees, which rotates independently and has locking screw. Collimator: Fixed, with adjustable axis, objective lens with focusing system, variable aperture slit. Telescope: Moveable with set screw and fine motion screw, adjustable axis. Telescope pillar carries vernier scale for accurate measurements. Focusable objective Lens. Ramsden Eyepiece with cross-wires and locking ring for focus lock. Prism Table: Provided with three leveling screws and engraved lines for prism placement in experiments. Comes complete with Prism Clamp, Grating Holder, Tommy Bar for axis adjustment and Instruction Sheet.
• All Plastic Sign Frame
• 24in x 24in legend area
• Has "All Visitors Must Report to Office" printed on both sides
• Regressed sign area helps to protect sign faces
• Features “click lock” hinges for a positive interlock in the open position
• Can be internally ballasted with sand
• Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces
• Outside Dimensions: 36”H X 25”W x 3”D
• Weight: 17 lbs.
Molded all plastic hollow sign frame that can be internally weighted down with sand. Only 3 or 4 pounds is recommended per leg. Most of the weight is at the bottom where it acts like an anchor. They are extremely durable. Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces. Features “click lock” hinges for a positive interlock in the open position. Legend area measure 24in x 24in. “All Visitors Must Report to Office” printed on both sides. Outside Dimensions: 36”H X 25”W x 3”D. Weight: 17 lbs. Ships UPS or FedEx Ground.
• All Plastic Sign Frame
• 24in x 24in legend area
• Has "Caution, Children Crossing Ahead" printed on both sides
• Regressed sign area helps to protect sign faces
• Features “click lock” hinges for a positive interlock in the open position
• Can be internally ballasted with sand
• Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces
• Outside Dimensions: 36”H X 25”W x 3”D
• Weight: 17 lbs.
Molded all plastic hollow sign frame that can be internally weighted down with sand. Only 3 or 4 pounds is recommended per leg. Most of the weight is at the bottom where it acts like an anchor. They are extremely durable. Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces. Features “click lock” hinges for a positive interlock in the open position. Legend area measure 24in x 24in. “Caution, Children Crossing Ahead” printed on both sides. Outside Dimensions: 36”H X 25”W x 3”D. Weight: 17 lbs. Ships UPS or FedEx Ground.
• All Plastic Sign Frame
• 24in x 24in legend area
• Has "Do Not Enter" printed on both sides
• Regressed sign area helps to protect sign faces
• Features “click lock” hinges for a positive interlock in the open position
• Can be internally ballasted with sand
• Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces
• Outside Dimensions: 36”H X 25”W x 3”D
• Weight: 17 lbs.
Molded all plastic hollow sign frame that can be internally weighted down with sand. Only 3 or 4 pounds is recommended per leg. Most of the weight is at the bottom where it acts like an anchor. They are extremely durable. Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces. Features “click lock” hinges for a positive interlock in the open position. Legend area measure 24in x 24in. “Do Not Enter” printed on both sides. Outside Dimensions: 36”H X 25”W x 3”D. Weight: 17 lbs. Ships UPS or FedEx Ground.
• All Plastic Sign Frame
• 24in x 24in legend area
• Has "Do Not Enter" printed red on white on both sides
• Regressed sign area helps to protect sign faces
• Features “click lock” hinges for a positive interlock in the open position
• Can be internally ballasted with sand
• Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces
• Outside Dimensions: 36”H X 25”W x 3”D
• Weight: 17 lbs.
Molded all plastic hollow sign frame that can be internally weighted down with sand. Only 3 or 4 pounds is recommended per leg. Most of the weight is at the bottom where it acts like an anchor. They are extremely durable. Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces. Features “click lock” hinges for a positive interlock in the open position. Legend area measure 24in x 24in. “Do Not Enter” printed red on white on both sides. Outside Dimensions: 36”H X 25”W x 3”D. Weight: 17 lbs. Ships UPS or FedEx Ground.
• All Plastic Sign Frame
• 24in x 24in legend area
• Has "Drop Off Only" printed on both sides
• Regressed sign area helps to protect sign faces
• Features “click lock” hinges for a positive interlock in the open position
• Can be internally ballasted with sand
• Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces
• Outside Dimensions: 36”H X 25”W x 3”D
• Weight: 17 lbs.
Molded all plastic hollow sign frame that can be internally weighted down with sand. Only 3 or 4 pounds is recommended per leg. Most of the weight is at the bottom where it acts like an anchor. They are extremely durable. Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces. Features “click lock” hinges for a positive interlock in the open position. Legend area measure 24in x 24in. “Drop Off Only” printed on both sides. Outside Dimensions: 36”H X 25”W x 3”D. Weight: 17 lbs. Ships UPS or FedEx Ground.
• All Plastic Sign Frame
• 24in x 24in legend area
• Has "Enter Here" printed on both sides
• Regressed sign area helps to protect sign faces
• Features “click lock” hinges for a positive interlock in the open position
• Can be internally ballasted with sand
• Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces
• Outside Dimensions: 36”H X 25”W x 3”D
• Weight: 17 lbs.
Molded all plastic hollow sign frame that can be internally weighted down with sand. Only 3 or 4 pounds is recommended per leg. Most of the weight is at the bottom where it acts like an anchor. They are extremely durable. Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces. Features “click lock” hinges for a positive interlock in the open position. Legend area measure 24in x 24in. “Enter Here” printed on both sides. Outside Dimensions: 36”H X 25”W x 3”D. Weight: 17 lbs. Ships UPS or FedEx Ground.
• All Plastic Sign Frame
• 24in x 24in legend area
• Has "EVENT PARKING" printed on both sides
• Regressed sign area helps to protect sign faces
• Features “click lock” hinges for a positive interlock in the open position
• Can be internally ballasted with sand
• Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces
• Outside Dimensions: 36”H X 25”W x 3”D
• Weight: 17 lbs.
These collapsible signs are molded hollow to be internally weighted down with sand. Most of the weight is at the bottom where it acts like an anchor. Ships UPS or FedEx ground. Extremely durable and printed on both sides. Overall size = 25" Wide x 36" High. Legend area measure 24" x 24". Ships UPS or FedEx Ground.
• All Plastic Sign Frame
• 24in x 24in legend area
• Has "Lot Full" printed on both sides
• Regressed sign area helps to protect sign faces
• Features “click lock” hinges for a positive interlock in the open position
• Can be internally ballasted with sand
• Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces
• Outside Dimensions: 36”H X 25”W x 3”D
• Weight: 17 lbs.
Molded all plastic hollow sign frame that can be internally weighted down with sand. Only 3 or 4 pounds is recommended per leg. Most of the weight is at the bottom where it acts like an anchor. They are extremely durable. Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces. Features “click lock” hinges for a positive interlock in the open position. Legend area measure 24in x 24in. “Lot Full” printed on both sides. Outside Dimensions: 36”H X 25”W x 3”D. Weight: 17 lbs. Ships UPS or FedEx Ground.
• All Plastic Sign Frame
• 24in x 24in legend area
• Has "NO IDLING ZONE" printed on both sides
• Regressed sign area helps to protect sign faces
• Features “click lock” hinges for a positive interlock in the open position
• Can be internally ballasted with sand
• Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces
• Outside Dimensions: 36”H X 25”W x 3”D
• Weight: 17 lbs.
These collapsible signs are molded hollow to be internally weighted down with sand. Most of the weight is at the bottom where it acts like an anchor. Ships UPS or FedEx ground. Extremely durable and printed on both sides. Overall size = 25" Wide x 36" High. Legend area measure 24" x 24". Ships UPS or FedEx Ground.
• All Plastic Sign Frame
• 24in x 24in legend area
• Has "No Parking" printed on both sides
• Regressed sign area helps to protect sign faces
• Features “click lock” hinges for a positive interlock in the open position
• Can be internally ballasted with sand
• Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces
• Outside Dimensions: 36”H X 25”W x 3”D
• Weight: 17 lbs.
Molded all plastic hollow sign frame that can be internally weighted down with sand. Only 3 or 4 pounds is recommended per leg. Most of the weight is at the bottom where it acts like an anchor. They are extremely durable. Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces. Features “click lock” hinges for a positive interlock in the open position. Legend area measure 24in x 24in. “No Parking” printed on both sides. Outside Dimensions: 36”H X 25”W x 3”D. Weight: 17 lbs. Ships UPS or FedEx Ground.
• All Plastic Sign Frame
• 24in x 24in legend area
• Has "No Parking / Buses Only" printed on both sides
• Regressed sign area helps to protect sign faces
• Features “click lock” hinges for a positive interlock in the open position
• Can be internally ballasted with sand
• Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces
• Outside Dimensions: 36”H X 25”W x 3”D
• Weight: 17 lbs.
Molded all plastic hollow sign frame that can be internally weighted down with sand. Only 3 or 4 pounds is recommended per leg. Most of the weight is at the bottom where it acts like an anchor. They are extremely durable. Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces. Features “click lock” hinges for a positive interlock in the open position. Legend area measure 24in x 24in. “No Parking / Buses Only” printed on both sides. Outside Dimensions: 36”H X 25”W x 3”D. Weight: 17 lbs. Ships UPS or FedEx Ground.