Glazed porcelain, one-piece construction. With fixed perforated plate. Straight sides with tapered stem.
This borosilicate (heat resistant) glass conical shaped flask with side arm is used in filtration processes.
100 ml Flask uses a size 4 stopper
150 ml Flask uses a size 5 stopper
250 ml Flask uses a size 6.5 stopper
500 ml Flask uses a size 6.5 stopper
Our Glass Dropping Pipettes consist of a glass tube attached to a 5ml bulb. Sold in packs of 12. Bulb color may vary.
Griffin type. Made of Zinc alloy. Die cast. Nickel plated. Cuts tubing up to 38mm (1 1/2") diameter. Spring loaded to stay open.
These plug caps for test tubes are high grip hollow made of low density polyethylene. Hollow caps makes insertion and removal from test tubes easy. Sold in packs of 500.
• Kjeldahl Bulb with #2 Stopper
• Borosilicate glass
• Sold in eaches
• Easy handling
• Efficient
Kjeldahl Bulb w/ Stoppers
These Borosilicate Glass Liebig Condensers find wide usage in the laboratory such as distillation, reflux operations, extraction etc. Sealed inner tube, large capacity of water jacket gives efficient cooling. Sized by effective length. 22 mm diameter.
This Type 1 (DIN# GL-45) Borosilicate Glass, general purpose media bottle is autoclavable with permanent white imprinted graduations and marking spots. The screw thread opening has an ID of approximately 300m. The supplied cap is liner-less and both the cap and drip free ring are polypropylene autoclavable to 140 degrees Celsius (284 degrees Fahrenheit).
Borosil brand pipettes are manufactured from specially selected heavy-wall machine-drawn borosilicate accurate bore glass tubing. They have precision formed jets and bevel ground ends to resist chipping. The graduation marks are in durable white enamel or amber stain, both are resistant to normal laboratory agents and repeated washing. All the pipettes are individually measured and then marked. Accuracy is ensured between any two readings, because of uniformity of bore. The pipettes can be autoclaved and if necessary can be flamed for sterilization.
Standard Conical shaped flasks, in seven sizes, borosilicate (heat resistant) glass, marked with graduations for approximate volumes, used in the laboratory for mixing, storing and heating of liquids.
50 ml flask uses a size 1 stopper
150 ml flask uses a size 5 stopper
250 ml flask uses a size 6.5 stopper
500 ml flask uses a size 6.5 stopper
1000 ml flask uses a size 9 stopper
Stoppers not included.
These polypropylene bottles are rigid, translucent and have excellent contact clarity. These bottles can be autoclaved filled as well when they are empty. The polypropylene cap has a built-in seal ring to make these bottles leak proof. Avaialble in 5 sizes.
| Size | Height | Neck Diameter ID/OD |
Pack Size |
| 60ml | 72mm | 17mm / 22mm | Pack of 12 |
| 125ml | 110mm | 16.5mm / 20mm | Pack of 12 |
| 250ml | 139mm | 20mm / 25mm | Pack of 12 |
| 500ml | 165mm | 20mm / 25mm | Pack of 12 |
| 1000ml | 222mm | 20mm / 25mm | Pack of 6 |
• Clear molded polypropylene pitchers
• Autoclavable
• Good chemical resistance
• Handles for easy and convenient lifting
• Raised graduations
• Top Flange
• Diameter: 83mm,
• Height: 99mm,
• Graduated Interval: 10ml
• Pack of 12
| 250ml | 500ml | 1000ml | 2000ml | |
|
Top Flange Diameter: Height: Graduated Interval: Pack Quantity: |
83mm 99mm 10ml Pack of 12 |
97mm 126mm 10ml Pack of 12 |
114mm 170mm 10ml Pack of 6 |
150mm 212mm 20ml Pack of 6 |
These handy molded polypropylene pitchers, are clear, autoclavable and have good chemical resistance. They have a handle for easy and convenient lifting, and feature raised graduations. Available in 4 sizes.
Maximum Use Temperature = 135°C
These 25ml to 1000ml beakers are molded in polypropylene, have excellent clarity and very good chemical resistance. These autoclavable beakers have prominently raised graduations on the outer surface. Pouring a solution is easy because of its tapered spout.
Maximum Use Temperature = 135°C
These long stem funnels have smooth walls, 60 degree one cone angle and external ribs to prevent air lock. Molded in polypropylene, these clear funnels can also be steam autoclaved.
Available in 5 Sizes
55mm - Top Inside Diameter: 50mm, Stem Length: 39mm
65mm - Top Inside Diameter: 61mm, Stem Length: 65mm
75mm - Top Inside Diameter: 74mm, Stem Length: 69mm
100mm - Top Inside Diameter: 93mm, Stem Length: 84mm
150mm - Top Inside Diameter: 148mm, Stem Length: 125mm
Versatile, polypropylene containers are graduated in ounces and milliliters. Graduated to 2 ounces.
These polypropylene bottles are rigid, translucent and have excellent contact clarity. These bottles can be autoclaved filled as well as empty. The polypropylene cap has a built-in seal ring to make these bottles leak proof.
| Size | Height | Neck Diameter ID/OD |
Pack Size |
| 60ml | 73mm | 20mm / 25mm |
Pack of 12
|
| 125ml | 100mm | 27mm / 32mm |
Pack of 12
|
| 250ml | 137mm | 35mm / 41mm |
Pack of 12
|
| 500ml | 149mm |
35mm / 41mm |
Pack of 12
|
|
1000ml
|
218mm |
35mm / 41mm |
Pack of 6
|