• 57" high flag/cone combinations
• 16" Flags can be removed to be used as hand-held flags for traffic control
• Cones are 28" high with a 14.5" square base
• Cone is made with 100% PVC polyvinyl chloride (contains no phthalates)
• Cones have UV inhibitors for resistance to fading
• Good visibility under all weather condition
• Cone will not mar floors.
These colorful flag/cone combinations are 57" high. The 16" flags can be removed from the cone adapter to be used as hand-held flags for traffic control. Cones are 28" high. The cones are constructed of brilliant fluorescent orange vinyl. Non-porous, dirt-resistant surface can be easily cleaned. Will not mar floors.
• All Plastic, Injection Molded A-Frame Leg
• Made of impact resistant polyethylene
• Accepts Plastic I-Beams, Type III Boards, and 1" x 8" Wood Boards
• Heavier leg requires less sand ballasting (Weighs 6 lbs.)
• Perfect for crowd control, road closures, and work zones
• Easy to set up, transport, and store. Use with one board or two
• Flashing light mounting receptacle on each leg
All Plastic, Injection Molded A-Frame Leg. Made of impact resistant polyethylene. Accepts 3 different types of boards: Plastic I-Beams, Type III Boards, and 1" x 8" Wood Boards. Heavier leg requires less sand ballasting (Weighs 6 lbs.). Perfect for crowd control, road closures, and work zones. Easy to set up, transport, and store. Use with one board or two. Flashing light mounting receptacle on each leg.
• 42” tall (47.5”H with handle)
• Stack up to 20% more on your truck!
- new compact nesting design
• Strong, ergonomic handle
- speeds placement on job
- fits two hands to make lifting with base easier
- string caution tape through handles
• Recessed area protects sheeting
• Use with 10, 16, or 30 lb. recycled rubber base (sold separately)
• Accepts same bases as our Navicade™ delineator
- reduces your base inventory
• NCHRP-350 Accepted, Meets MUTCD Standards
42” tall (47.5”H with handle) plain stacker cone. Stack up to 20% more on your truck! - new compact nesting design. Strong, ergonomic handle speeds placement on job, and fits two hands to make lifting with base easier. String caution tape through handles. Recessed area protects sheeting. Use with 10, 16, or 30 lb. recycled rubber base. Accepts same bases as our Navicade™ delineator - reduces your base inventory. NCHRP-350 Accepted, Meets MUTCD Standards.Base not included - Order separately.
• 41" high flag/cone combinations
• Flags can be removed to be used as hand-held flags for traffic control
• Flags are 16 inches x 16 inches
• Cones are 18" high with a 8.25" square base
• All cones include weighted cone stabilizer to prevent tipping from strong winds
• Cone is made with 100% PVC polyvinyl chloride (contains no phthalates)
• Cones have UV inhibitors for resistance to fading
• Good visibility under all weather condition
• Cone will not mar floors.
These colorful flag/cone combinations are 41" high. Flags can be removed from the cone adapter to be used as hand-held flags for traffic control. Cones are 18" high. All cones include weighted cone stabilizer to prevent tipping from strong winds. The cones are constructed of brilliant fluorescent orange vinyl. Non-porous, dirt-resistant surface can be easily cleaned. Will not mar floors.
• Amber bi-directional light
• Meets MUTCD and ITE specifications
• 3-way - flashing, steady burn, off
• Weather resistant circuit chip
• 7" Polycarbonate Lens - extremely durable. UV Stabilized
• Attach to all barricades, drums, panels, etc.
• yellow housing/base uses (2)6-volt batteries (not included)
Our light comes standard with all of the features that you would pay more for on competitive lights. Features such as a photocell which automatically turns the light off when the surrounding light conditions make the light ineffective... Sunny daylight hours are an excellent example of this. This feature greatly extends the life of the batteries as the light only operates when it can be seen. Increased battery life not only saves you money on batteries, but on the labor required to service the light as well. Another key feature is our 3-Way Switch. This switch allows a single light to serve two purposes. Each of our lights operates in either flashing or steady-burn modes. It only takes a simple turn of the switch to change the personality of our lights. Another cost- saving feature is that our light will accept batteries in any orientation as long as the springs are pointing up. There is no need to wonder if the battery is positioned properly, there will be no more batteries thrown out because it was thought that they were bad, when the real problem was the battery turned in the wrong direction. Compare our light to the competition and you will see that we out-shine them every time. Battery not included.
• 1” x 8“ (nominal) plastic boards in 3 lengths
• High density polyethylene material resists fading, chipping, and splintering
• Flat surface displays engineering grade sheeting
• Hollow core extruded design
• Internal walls provide lightweight strength and durability
• High density polyethylene material resists fading, chipping, or splintering
• Flat surface displays retroreflective sheeting
1” x 8“ x 4', 6' or 8' long plastic boards. High density polyethylene material resists fading, chipping, and splintering. Flat surface displays engineering grade sheeting. Hollow core extruded design. Internal walls provide lightweight strength and durability.
Dimensions: 0.75” W x 8" H
• 39"L X 14"W X 2"H Middle Section
• 7"L X 14"W X 2"H End Section
• Reduce vehicle speeds 5-10 mph without tire or vehicle damage.
• Temporary or permanent installation on concrete or asphalt.
• Lightweight and flexible, it conforms to contours of road surface.
• Built to last, withstand over 2,000 psi pressure and won't chip, break or crack
• Easily transported and fast installation without the need for heavy equipment.
• Heavy duty product; Backed by a 2 year warranty;
• Can be installed by a single person with light tools
• Do not require repainting
• Easily movable and removable
• 2 year warranty against materials defect
A Speed Bump is a raised device, which is placed across a roadway to reduce vehicle speeds 5-10 mph. This option is ideal where vehicle speeds are expected to be lower. Order two end pieces and the appropriate number of middle sections to span the width of roadway.
Place in strategic locations on the street, in parking lots, around schools, on private residential thoroughfares or anywhere traffic calming is necessary. It slows traffic effectively without tire or vehicle damage. Use to control traffic speed during public events, gatherings, or special events. Temporary or permanent installation on concrete or asphalt. Mastic or anchor pins available as specified. Lightweight and flexible, it conforms to contours of road surface. Economical and built to last, ENVIROform speed bumps withstand over 2,000 psi pressure. Easily transported and fast installation without the need for heavy equipment. Features: Heavy duty product; Backed by a 2 year warranty; All Speed Bumps and Speed Humps are uniformly made; Can be installed by a single person; Maximum visibility; Do not require repainting; Installed with light tools; Easily movable and removable; Does not chip, break or crack; Long wearing; Environmentally friendly; Promotes recycling awareness; 2 year warranty against materials defect; Custom configurations to your needs.
Super Stripe Traffic Paint is heavy-duty and lays miles of lines so you get more stripes per dollar. One case will give you about 2,400 linear feet of bright crisp 3" lines. Perfect for parking lots, floors and safety zones. 12 cans/case.
The Navicade was introduced to the market in 2005 and has really taken off as a replacement for barrels. The narrow design and offset handle makes picking up and setting up extremely quick and easy.. Unique Handle Design. Slim Style - 49.25" H x 7.6" W. Weighs only 3 lbs. (without base). Molded-in holes for mounting light and ropes. Can be used to rope work area. Stackable for easy transportation or storage. Snug fitting bases will not be knocked over. Accepts up to four (4) bands of 4" reflective sheeting. Navicade is designed for easy placement and pick-up from a truck bed. Made of durable low-density polyethylene. Federal Highway Administration Approved. NCHRP 350 Compliant.