To demonstrate convection of heat in liquids. Rectangular glass tube 200 x 150mm sides and 22mm in diameter with a built in funnel for easy pouring in of the liquid. Made from Borosilicate Glass. Instructions included.
To demonstrate convection of heat in liquids. Rectangular glass tube 200 x 150mm sides and 22mm in diameter with a built in funnel for easy pouring in of the liquid. Made from Borosilicate Glass. Instructions included.
A very simple, easy and economical way of measuring melting points. The apparatus consists of an aluminum block 2.5" (62mm) in diameter by 2" (50mm) high, with a slanted hole to accept a thermometer. The testing material is sprinkled on the top of the block and the block is heated with a heat source like a bunsen burner. As soon as the material starts to melt the reading on the thermometer is the melting point. This apparatus can be used to measure melting points upto 250 degrees C. Stand and thermometer not included.
A very simple, easy and economical way of measuring melting points. The apparatus consists of an aluminum block 2.5" (62mm) in diameter by 2" (50mm) high, with a slanted hole to accept a thermometer. The testing material is sprinkled on the top of the block and the block is heated with a heat source like a bunsen burner. As soon as the material starts to melt the reading on the thermometer is the melting point. This apparatus can be used to measure melting points upto 250 degrees C. Stand and thermometer not included.
To study and demonstrate heat absorption and radiation. Consists of two metal concave plates one white and the other painted black with thermometer holders on the back, and in-between is a lamp, heat source. When the lamp is switched on and the temperature is measured of the metal plates, it can be studied which one absorbs heat quicker and more than the other. After the lamp is turned off, we can also study which losses heat quicker. Lamp operates on 12VDC. Base Size 7.75" x 7.75" x 0.5". Metal plates are 3.75" in dia. Total height of unit 5.5". One bulb included, thermometers not included.
To study and demonstrate heat absorption and radiation. Consists of two metal concave plates one white and the other painted black with thermometer holders on the back, and in-between is a lamp, heat source. When the lamp is switched on and the temperature is measured of the metal plates, it can be studied which one absorbs heat quicker and more than the other. After the lamp is turned off, we can also study which losses heat quicker. Lamp operates on 12VDC. Base Size 7.75" x 7.75" x 0.5". Metal plates are 3.75" in dia. Total height of unit 5.5". One bulb included, thermometers not included.
A safer and technologically advanced way to study heat coductivity in different metals. The unit consists of four metal strips, steel, brass, aluminum and copper, mounted on a strong plastic base. The strips are 5.25" (135mm) long x 0.38" (9.5mm) wide x 0.11" (2.9mm) thick. Of the total length about 1.13" (28mm) at the end is not plastic backed, so the bars can be immersed in hot water and the rate of conduction of heat can be measured by the strip thermometers mounted on the strips. Plastic base is 7" (175mm) long.
A safer and technologically advanced way to study heat coductivity in different metals. The unit consists of four metal strips, steel, brass, aluminum and copper, mounted on a strong plastic base. The strips are 5.25" (135mm) long x 0.38" (9.5mm) wide x 0.11" (2.9mm) thick. Of the total length about 1.13" (28mm) at the end is not plastic backed, so the bars can be immersed in hot water and the rate of conduction of heat can be measured by the strip thermometers mounted on the strips. Plastic base is 7" (175mm) long.
For introducing the concept that friction depends on the nature and smoothness of materials. The kit consists of three wooden blocks, L x W, 100mm x 70mm, with hooks. One with a highly polished side, second with a sandpaper side and third with an aluminum side. Complete with a polished wooden base about, L x W, 355mm x 70mm. Instructions included.
For introducing the concept that friction depends on the nature and smoothness of materials. The kit consists of three wooden blocks, L x W, 100mm x 70mm, with hooks. One with a highly polished side, second with a sandpaper side and third with an aluminum side. Complete with a polished wooden base about, L x W, 355mm x 70mm. Instructions included.
Same as 15626, but does not include Basic Linear Expansion apparatus.
Same as 15626, but does not include Basic Linear Expansion apparatus.
Students fill one container with water at room temperature and the other with boiling water. A thermometer is placed in each container and the water temperature in both cups read before heat transfer. The metal bar is then immersed in the cups, and students observe heat lost by boiling water and heat gained in the cooler water. Each kit includes: 2 insulated containers; 2 insulated lids with slots; 1 U-shaped aluminum transfer bar; 2 thermometers 20 degrees to 110 degrees. Additional materials required: low-temperature thermometer.
Students fill one container with water at room temperature and the other with boiling water. A thermometer is placed in each container and the water temperature in both cups read before heat transfer. The metal bar is then immersed in the cups, and students observe heat lost by boiling water and heat gained in the cooler water. Each kit includes: 2 insulated containers; 2 insulated lids with slots; 1 U-shaped aluminum transfer bar; 2 thermometers 20 degrees to 110 degrees. Additional materials required: low-temperature thermometer.
Illustrates linear and spherical expansion by heating and contraction by cooling. Mild steel bar 110x12.5mm, length x diameter. Mounted on a rod with wooden handle and a brass gauge 150x38mm with a cutout mounted on a separate wooden handle which just admits the bar lengthways and a hole into which the bar passes endways when cold.
Illustrates linear and spherical expansion by heating and contraction by cooling. Mild steel bar 110x12.5mm, length x diameter. Mounted on a rod with wooden handle and a brass gauge 150x38mm with a cutout mounted on a separate wooden handle which just admits the bar lengthways and a hole into which the bar passes endways when cold.
Metal construction. With sliding plate glass front. Two glass chimneys. Candle holder is mounted in the box.
Metal construction. With sliding plate glass front. Two glass chimneys. Candle holder is mounted in the box.
Metal construction. Complete with 3 metal rods (aluminum, bass and iron). stove hammer finish mounted on wooden polished base.
Metal construction. Complete with 3 metal rods (aluminum, bass and iron). stove hammer finish mounted on wooden polished base.
Demonstrates the difference in thermal conductivity of different metals. Consists of five metal rods stainless steel, brass, copper, iron and aluminum connected to a center metal, brass, hub which is mounted on a rod with wooden handle. The five rods have depressions on the ends to hold wax. When the center hub is heated, heat is conducted through the rods and conductivity of heat can be ascertained by the melting of wax.
Demonstrates the difference in thermal conductivity of different metals. Consists of five metal rods stainless steel, brass, copper, iron and aluminum connected to a center metal, brass, hub which is mounted on a rod with wooden handle. The five rods have depressions on the ends to hold wax. When the center hub is heated, heat is conducted through the rods and conductivity of heat can be ascertained by the melting of wax.
Demonstrates expansion of metals with heat.
Demonstrates expansion of metals with heat.