1-14 Paper strips, change for each full pH unit,100 strips per vial.
1-14 Paper strips, change for each full pH unit,100 strips per vial.
Kit includes 1 each of Test Tube Rack for 6, Test Tube Brush, Test Tube Clamp, Crucible Tongs, Lab Scoop, 6" Spatula and Forceps.
Kit includes 1 each of Test Tube Rack for 6, Test Tube Brush, Test Tube Clamp, Crucible Tongs, Lab Scoop, 6" Spatula and Forceps.
Perfect for counting, measuring and patterning. Plastic 1 cm cubes in 10 colors come in a storage tub with Activity Guide. Grades 1 +
This set of 500 Centimeter cubes is perfect for counting, measuring and patterning. Plastic 1 cm cubes in 10 colors come in a storage tub with Activity Guide. Grades 1 +
Accuracy: ±0.05pH Resolution: 0.01pH The pHep 5 includes features such as a dual-level LCD, battery level indicator, replaceable pH electrode cartridge, instability indicator, automatic shut-off and automatic calibration all in a floating, waterproof casing. Supplied with protective cap, electrode removal tool, batteries and instructions.
Accuracy: ±0.05pH Resolution: 0.01pH The pHep 5 includes features such as a dual-level LCD, battery level indicator, replaceable pH electrode cartridge, instability indicator, automatic shut-off and automatic calibration all in a floating, waterproof casing. Supplied with protective cap, electrode removal tool, batteries and instructions.
For 22mm-25mm tubes. Holds 30 tubes. 44 drying pins Great visibility and very compact. Constructed of polyethylene, is autoclavable and extremely stable. Size is about 10" x 4" x 3".
A set of premium quality pH 7.01 and 10.01 calibration buffer solutions. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna’s line of calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened sachet. 5 sachets of pH 7.01 and 5 sachets of pH 10.01 with each containing 20 mL of buffer.
• Color coded label for easy pH buffer value identification
• Accuracy of +/- 0.01 pH @ 25°C
• Temperature chart of the actual pH value at various temperatures printed on each bottle
A set of premium quality pH 7.01 and 10.01 calibration buffer solutions. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna’s line of calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened sachet. 5 sachets of pH 7.01 and 5 sachets of pH 10.01 with each containing 20 mL of buffer. Color coded label for easy pH buffer value identification. Accuracy of +/- 0.01 pH @ 25°C. Temperature chart of the actual pH value at various temperatures printed on each bottle
A set of premium quality pH 4.01 and 7.01 calibration buffer solutions. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna’s line of calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened sachet. The HI77400P is for 5 sachets of pH 4.01 and 5 sachets of pH 7.01 with each containing 20 mL of buffer.
• For use with Checker 1 pH Meter
• Color coded label for easy pH buffer value identification
• Accuracy of +/- 0.01 pH @ 25°C
• Temperature chart of the actual pH value at various temperatures printed on each sachet
A set of premium quality pH 4.01 and 7.01 calibration buffer solutions. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna’s line of calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened sachet. The HI77400P is for 5 sachets of pH 4.01 and 5 sachets of pH 7.01 with each containing 20 mL of buffer.
Perfect for counting, measuring and patterning. Plastic 1 cm cubes in 10 colors come in a storage tub with Activity Guide. Grades 1 +
This set of 1000 Centimeter cubes is perfect for counting, measuring and patterning. Plastic 1 cm cubes in 10 colors come in a storage tub with Activity Guide. Grades 1 +
All components are rigidly mounted on a molded casing covered with a reinforced colored ABS plastic plate. Minimal vibration and well-balanced rotating arm give years of trouble-free operation. Max stirring capacity 1 liter. Minimum speed: 100rpm. Maximum speed: 800 to 100 rpm. 110/115V, 50/60 Hz power supply. 5.4"diameter x 2" height. Each stirrer comes with 1" long x 3" diameter Teflon coated magnetic stir bar and instruction manual.
All components are rigidly mounted on a molded casing covered with a reinforced colored ABS plastic plate. Minimal vibration and well-balanced rotating arm give years of trouble-free operation. Max stirring capacity 1 liter. Minimum speed: 100rpm. Maximum speed: 800 to 100 rpm. 110/115V, 50/60 Hz power supply. 5.4"diameter x 2" height. Each stirrer comes with 1" long x 3" diameter Teflon coated magnetic stir bar and instruction manual.
Capacity: 610 Grams. Sensitivity: 0.1 Grams. Calibrations: Front Beam - 10g x 0.1g, Center. Beam - 500g x 100g, Rear Beam - 100g x 10g
Capacity: 610 Grams. Sensitivity: 0.1 Grams. Calibrations: Front Beam - 10g x 0.1g, Center. Beam - 500g x 100g, Rear Beam - 100g x 10g
If you already own a checker, this replacement electrode will fit any checker.
If you already own a checker, this replacement electrode will fit any checker.
Polypropylene covered for retrieving stirring bars from most liquids. Powerful magnet at one end, ring handle at the other end. 300mm length.
Polypropylene covered for retrieving stirring bars from most liquids. Powerful magnet at one end, ring handle at the other end. 300mm length.
Magnetic, polytetrafluorethylene coated. For use with magnetic stirrers.
Single speed. This centrifuge consists of a substantial cast-iron body enclosing a steel pinion and worm drive fitted with a ball-thrust race. It comes with a removable crank handle and one thumb screw clamp to clamp the machine to a table. The head has captive union rings to accommodate 15 ml buckets. The body is baked in a hammertone finish. Complete with plastic buckets and glass centrifuge tubes.
Single speed. This centrifuge consists of a substantial cast-iron body enclosing a steel pinion and worm drive fitted with a ball-thrust race. It comes with a removable crank handle and one thumb screw clamp to clamp the machine to a table. The head has captive union rings to accommodate 15 ml buckets. The body is baked in a hammertone finish. Complete with plastic buckets and glass centrifuge tubes.
Hanging metric weights used to extend scale capacity of Ohaus 750-S0 and 750-SW metric triple-beam balances (not included). Cast iron construction has durability and long life. The set of three attachment weights includes two 1,000g weights and one 500g weight.
Calibration weights are used to measure the weight or mass of an object using a balance or scale, or to calibrate other weights or instruments. Calibration weights can be certified or uncertified. Certified weights meet strict guidelines for accuracy and can usually be recertified. Certified weights are used in labs where a high degree of accuracy and repeatability is required. Uncertified weights are used where a lower degree of accuracy is required, including student laboratories, rough weighting operations, and measuring force. Hooked and slotted weights are often used to measure pressure, torque, and tensile strength, and to demonstrate basic laws of physics. Calibration weights differ from lab weights, which are general purpose weights used to hold an object in place, similar to a paperweight.
Hanging metric weights used to extend scale capacity of Ohaus 750-S0 and 750-SW metric triple-beam balances (not included). Cast iron construction has durability and long life. The set of three attachment weights includes two 1,000g weights and one 500g weight. Calibration weights are used to measure the weight or mass of an object using a balance or scale, or to calibrate other weights or instruments. Calibration weights can be certified or uncertified. Certified weights meet strict guidelines for accuracy and can usually be recertified. Certified weights are used in labs where a high degree of accuracy and repeatability is required. Uncertified weights are used where a lower degree of accuracy is required, including student laboratories, rough weighting operations, and measuring force. Hooked and slotted weights are often used to measure pressure, torque, and tensile strength, and to demonstrate basic laws of physics. Calibration weights differ from lab weights, which are general purpose weights used to hold an object in place, similar to a paperweight.
Easy wind-up tapes are marked in inches and feet on one side and mm and cm on the other. Has removeable handle for easy control. Durable casing for years of use.
Easy wind-up tapes are marked in inches and feet on one side and mm and cm on the other. Has removeable handle for easy control. Durable casing for years of use.
Easy wind-up tapes are marked in inches and feet on one side and mm and cm on the other. Durable casing for years of use.
Easy wind-up tapes are marked in inches and feet on one side and mm and cm on the other. Durable casing for years of use.