Sloping front meters for easy reading. +/- 2.5% accuracy with overload protector and color-coded bar. 4"W x 5.5"D x 3.5" H. External zero adjustment.
Sloping front meters for easy reading. +/- 2.5% accuracy with overload protector and color-coded bar. 4"W x 5.5"D x 3.5" H. External zero adjustment.
Sloping front meters for easy reading. +/- 2.5% accuracy with overload protector and color-coded bar. 4"W x 5.5"D x 3.5" H. External zero adjustment.
Sloping front meters for easy reading. +/- 2.5% accuracy with overload protector and color-coded bar. 4"W x 5.5"D x 3.5" H. External zero adjustment.
Sloping front meters for easy reading. +/- 2.5% accuracy with overload protector and color-coded bar. 4"W x 5.5"D x 3.5" H. External zero adjustment.
To verify Ohm's Law. The apparatus consists of one wire wound rheostat, one moving coil voltmeter and one moving coil ammeter, mounted on a bakelite plate in a wooden case. With four terminals, two for battery connection and two for resistance coil. Supplied with one resistance coil, without battery.
To verify Ohm's Law. The apparatus consists of one wire wound rheostat, one moving coil voltmeter and one moving coil ammeter, mounted on a bakelite plate in a wooden case. With four terminals, two for battery connection and two for resistance coil. Supplied with one resistance coil, without battery.
Comprising a primary coil of insulated copper wire wound on a cylinder and fitted with terminals, together with a secondary coil of fine insulated copper wire wound on a cylinder into which the primary coil may be fitted. A soft iron core, for inserting in the primary coil, is included. To demonstrate the concept of induced current and with the soft iron core the electromagnetic effect can also be demonstrated.
Comprising a primary coil of insulated copper wire wound on a cylinder and fitted with terminals, together with a secondary coil of fine insulated copper wire wound on a cylinder into which the primary coil may be fitted. A soft iron core, for inserting in the primary coil, is included. To demonstrate the concept of induced current and with the soft iron core the electromagnetic effect can also be demonstrated.
All parts easily visible. Rigid construction. Mounted on wooden board nicely polished. Workable on 3-4 volts AC or DC.
All parts easily visible. Rigid construction. Mounted on wooden board nicely polished. Workable on 3-4 volts AC or DC.
Features 3 1/2 digit, 2,000 count display, transistor test, audible continuity, diode test, signal injector, overload protection, pocket-size, low cost. Dimensions: 5" X 2 29/32" W X 1"D. Weight 4.5 oz.
Features 3 1/2 digit, 2,000 count display, transistor test, audible continuity, diode test, signal injector, overload protection, pocket-size, low cost. Dimensions: 5" X 2 29/32" W X 1"D. Weight 4.5 oz.
Big, for teaching the basic concept of generating electricity electrochemically. Consists of a chemically inert plastic jar with plastic cap fitted with Zinc and Copper plates fitted to terminals. Instructions included.
Big, for teaching the basic concept of generating electricity electrochemically. Consists of a chemically inert plastic jar with plastic cap fitted with Zinc and Copper plates fitted to terminals. Instructions included.
For demonstrating and conducting electrolysis experiments. Three thick copper plates with brass terminals, suspended from a bakelite cover an inert plastic jar. The outer plates form the anode and the central one is the cathode. The center plate may be taken in or out of the holder easily for weighing. Instructions included.
For demonstrating and conducting electrolysis experiments. Three thick copper plates with brass terminals, suspended from a bakelite cover an inert plastic jar. The outer plates form the anode and the central one is the cathode. The center plate may be taken in or out of the holder easily for weighing. Instructions included.
10 kinds of Resistances mounted on a box type plastic base. Ideal for introduction of resistance in a circuit. 5, 10, 15, 200, 470, 1K, 2K, 10K, 50K and 100k resistances. Connection by 4mm sockets. 8"(200mm) x 5"(125mm) x 1"(25mm).
10 kinds of Resistances mounted on a box type plastic base. Ideal for introduction of resistance in a circuit. 5, 10, 15, 200, 470, 1K, 2K, 10K, 50K and 100k resistances. Connection by 4mm sockets. 8"(200mm) x 5"(125mm) x 1"(25mm).
This apparatus is used to demonstrate and teach the basic principle of an electric meter. Apparatus consists of a 3.75" (90mm) dia. air coil wound on an acrylic tube with an acrylic plate in the center to hold a compass. The coil has multiple tappings of 50, 100 and 200 turns, and also has a built-in potentiometer for varying the current, these features allow multiple readings. Operates on one "AA" battery (not included). Includes one compass. Base 7.34" (195mm) x 4.75" (120mm) x 0.5" (12mm). Total height 4.25" (110mm).
• Install a sound module to generate the sounds of police cars
• Learn the important role resistors and potentiometers
• Use a multimeter to measure invisible voltage and current
• Use a FM radio module to build an alarm clock
Tap into the awesome world of electronics with this advanced system of snap-together electric building blocks. Start out by experimenting with colorful light-up circuits as you dive into the basics of electricity. Install a sound module to generate the sounds of police cars, ambulances, or fire engines. Learn the important role resistors and potentiometers (variable resistors) play in an electronic circuit. Use a multimeter to measure invisible voltage and current flowing through your circuit. Investigate transistors in switches and amplifiers to learn how the logical circuits in computers work. Build circuits that use sensors to detect moisture, temperature, and visible light. Incorporate capacitors in your circuits to store and discharge electricity for specific functions, such as a countdown clock and a red-green alternate flasher. Test out the indispensable 555 timer to build some complicated circuits. Use an operational amplifier and an FM radio module to build an alarm clock. This kit uses the same unique electric building blocks as our other electronics kits, with the addition of many new advanced components, allowing you to build more complex circuits. The more than 140 electronic components include capacitors, resistors, transistors, LEDs (light emitting diodes), phototransistor, switches, speaker, integrated circuit, infrared LED, diodes, FM tuner, 555 timer, operation amplifier, two potentiometers, electrodes, voltage and current meter, microphone, and 9-volt battery pack.
For use with 14746
For use with 14746
12" Hollow glass friction rod. Approximately 1/2" in diameter.
12" Hollow glass friction rod. Approximately 1/2" in diameter.
12" x 12" Silk riction pad.
12" x 12" Silk friction pad.
12" x 12" Cotton Friction Pad.
12" x 12" Cotton Friction Pad.
12" x 12" Wool friction pad.
12" x 12" Wool friction pad.
The manual contains detailed illustrations and explanations of 24 hands-on experiments that can be conducted using the GENECON and the GENECON Kit. Concepts covered range from circuit types to principles of electromagnetism. This is a must-have manual for every science curriculum.
Open model. Shows all the parts of a motor. Operating voltage 4-6V. Supplied complete with color disc. 120x80x115mm.
Open model. Shows all the parts of a motor. Operating voltage 4-6V. Supplied complete with color disc. 120x80x115mm.
This pre-assembled DC motor is designed for students to learn about electromagnetic forces. The open structure resembles the diagram found in many textbooks. The polarity of the magnets can be reversed to change the direction of rotation. The motor can also be used with a rheostat to observe the change of speed with the change of current. The DC motor can stand vertically or horizontally and operates on a 1.5V battery (not included). It comes in a sturdy plastic storage case with a student activity manual Shipping weight: 11.45 oz., dimensions: 5.5" x 4.5" x 2.5".
Pith balls react sensitively to static charges like those from a charged friction rod or a Van de Graaff generator.
Pith balls react sensitively to static charges like those from a charged friction rod or a Van de Graaff generator.
This kit allows students to explore the electrical properties of different combinations of electrode materials using safe, everyday chemicals such as soda, vinegar, and fruit juice as electrolytes. The set contains everything needed for the experiments except the electrolytes. Voltage, current, and polarization effects can be investigated. Contents of the set include a simple cell with electrode holders, electrodes of copper, aluminum, iron, and zinc, a mounted resistor for use as a current load, a multimeter, and a manual.
Used to power portable radios, cassette players, children's toys and other situations where four C, AA or AAA cells are used. Size: 6.375 x 4.5 x 0.375" 11 oz. The F6220 includes a 12 foot cord, DC adapter jacks and jumper cord.