• All Plastic Sign Frame
• 12in x 24in legend area
• Has "Pull Forward" printed on both sides
• Regressed sign area helps to protect sign faces
• Features “click lock” hinges for a positive interlock in the open position
• Can be internally ballasted with sand
• Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces
• Outside Dimensions: 36”H X 13”W x 3”D
• Weight: 10 lbs.
Molded all plastic hollow sign frame that can be internally weighted down with sand. Only 3 or 4 pounds is recommended per leg. Most of the weight is at the bottom where it acts like an anchor. They are extremely durable. Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces. Features “click lock” hinges for a positive interlock in the open position. Legend area measure 12in x 24in. "Pull Forward" printed on both sides. Outside Dimensions: 36”H X 13”W x 3”D. Weight: 10 lbs. Ships UPS or FedEx Ground.
• 48" rain coat.
• Made with 0.35mm thick PVC and polyester fabric
• Vented cape back with storm flap.
• Detachable hood.
• Two outside pockets with flaps.
• Snap front closure.
• Light to medium duty
• Available with or without CROSSING GUARD emblem
Ideal for survey crews, law enforcement, military, ranching and forestry. This rain coat is made of a .35mm PVC layer over polyester perfect for light to medium duty applications. It features a vented cap back with a storm flap and detachable drawstring hood. A corduroy collar and 2 outside pockets with flaps. The front snap closure features a storm flap to keep the rain out even in the most punishing conditions.
This 1/2 inch x 36 yards Vinyl Floor Marking Tape is perfect for marking your gym floors, courts, or any hard smooth surface. Made of tough vinyl, this floor tape comes off clean and won’t scuff your floors, but is strong enough to hold up to foot traffic and equipment. This tough vinyl tape is the thrifty answer for marking floors WITHOUT PAINTING. You can put it down easily in straight lines or in a curve. Available in 7 colors. For INDOOR use only.
WARNING: Tape should not be used on recently finished floors. It is also necessary to consult a floor finishing expert before using tape on your floor in order to assess risk to floor. In addition, you should test tape on a small portion of your floor before applying any tape.
• 18" x 18" Paddle Sign
• For pedestrians on the sidewalk
• A reversible sign that goes from STOP to GO when it is ready to cross a street
• Large letters on aluminum sign
For pedestrians on the sidewalk. A reversible sign that goes from STOP to GO when it is ready to cross a street. Large letters on aluminum sign. 18" x 18" as shown.
• The traditional 5-panel cap
• 100% polyester front.
• Seamless foam front panel with lining.
• 8 row stitching on visor.
• Matching fabric undervisor, sweatband, and braid plastic adjustable snap.
• Orange or Yellow
• Available with or without Safety Patrol Emblem
This orange cap has a 100% polyester front. The traditional 5-panel cap has a seamless foam front panel with lining. 8 row stitching on visor. Matching fabric undervisor, sweatband, and braid plastic adjustable snap.
Lightweight, high quality, knitted, seamless gloves. Made of acrylic yarns. High visibility orange. Comfortable for year-round use. Black PVC dots on both sides. Adult Size. One size fits all.
• 4" high with 4" square base
• Made with 100% PVC polyvinyl chloride (contains no phthalates)
• Conical and top of base is one continuous layer
• Brilliant color with UV inhibitors for resistance to fading
• Good visibility under all weather condition
• Wide body design ensures stability
• Able to return to their original shape after impact
• Will not mar floors.
• Available in 5 sizes
4" high with 4" square base
6" high with 6" square base
12" high with 8.25" square base
18" high with 10.75" square base
28" high with 14.5" square base
These cones are constructed of brilliant fluorescent orange vinyl. Non-porous, dirt-resistant surface can be easily cleaned. Will not mar floors. Virtually indestructible. Will collapse under pressure then spring back into shape. Easy stacking. Can be used for lane markers, crowd control, obstacle courses, boundary markers, marking danger areas, repair areas and driver training. Available in 6 Sizes.
• All Plastic Sign Frame
• Has a 12in x 24in dry erase board on both sides
• Regressed sign area helps to protect sign faces
• Features “click lock” hinges for a positive interlock in the open position
• Can be internally ballasted with sand
• Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces
• Outside Dimensions: 36”H X 13”W x 3”D
• Weight: 10 lbs.
Molded all plastic hollow sign frame that can be internally weighted down with sand. Only 3 or 4 pounds is recommended per leg. Most of the weight is at the bottom where it acts like an anchor. They are extremely durable. Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces. Features “click lock” hinges for a positive interlock in the open position. Has a 12in x 24in dry erase board on both sides. Outside Dimensions: 36”H X 13”W x 3”D. Weight: 10 lbs. Ships UPS or FedEx Ground. NOTE: This item is not intended to be left outdoors, or used outdoors during wet weather.
Riveted joint. Nickel plated. 9 inches long. Also for test tubes and vials.
• 15" x 15" sign
• Lightweight - weighs only 10 ounces!
• Lightweight corrugated plastic material with engineer grade reflective finish
• 1" PVC plastic handle.
Lightweight - weighs only 10 ounces! 15" x 15" size. Lightweight corrugated plastic material with engineer grade reflective finish. 1" PVC plastic handle.
NOTE: Does NOT meet MUTCD requirements for school zones.
• All Plastic Sign Frame
• 12in x 24in legend area
• Has "Drop Off Only" printed on both sides
• Regressed sign area helps to protect sign faces
• Features “click lock” hinges for a positive interlock in the open position
• Can be internally ballasted with sand
• Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces
• Outside Dimensions: 36”H X 13”W x 3”D
• Weight: 10 lbs.
Molded all plastic hollow sign frame that can be internally weighted down with sand. Only 3 or 4 pounds is recommended per leg. Most of the weight is at the bottom where it acts like an anchor. They are extremely durable. Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces. Features “click lock” hinges for a positive interlock in the open position. Legend area measure 12in x 24in. “Drop Off Only” printed on both sides. Outside Dimensions: 36”H X 13”W x 3”D. Weight: 10 lbs. Ships UPS or FedEx Ground.
• Rapidly removes Graffiti and Tagging Obscenities!
• Safe, Bio-degradable, Non-toxic, Non-Caustic and Non-Flammable!
• Will Not Run Off Vertical Surface!
• Originally developed for Public Works Departments and State DOT’S
Works on:
• Street Safety Signs
• Bridges
• Restroom Privacy Panels
• Tile
• Metal, Brick, and Sided Buildings
• Plastic Playground Equipment
• Concrete Walls
• Railroad Cars
• Trees
• Rocks
First Impressions are lasting Impressions! If you are responsible for removing graffiti, you know how frustrating and expensive this task can be. Whether you are a governmental agency, a facility manager or a maintenance supervisor and you need to remove a simple declaration of love or a gang symbol, using TAGSTER will solve your problem. TAGSTER is extremely versatile and can be used on variety of different surfaces like metal, concrete, wood, and plastic. TAGSTER was originally developed for Public Works Departments and State DOT’S who have been plagued for years by vandals that spray paint, obscenities, crude language and declarations of love on buildings, equipment, traffic signs, restrooms, playground equipment and bridge embankments.
• All Plastic Sign Frame
• Regressed sign area helps to protect sign faces
• Features “click lock” hinges for a positive interlock in the open position>
• Can be internally ballasted with sand
• Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces
• Outside Dimensions: 45”H X 25”W x 3”D
• Weight: 18.5 lbs (28.5 lbs. with sand)
The most cost effective way to advertise events, direct traffic or alert students of important information. Just attach your own 24" x 36" poster or sign with screws, or purchase our SA872P Changeable Message Sign Kit (sold separately). Overall Size 25" wide x 45" high. Sign regress of 24" wide x 36" high. Patented Locking Hinge Keeps Message Board Open. Hole with plug for sand ballasting. Unit weighs 18.5 lbs (28.5 lbs. with sand). Stacking lugs assure no sliding and scratching during shipping. Available only in white.Does not qualify for free shipping.
• Multi-function flash settings
• Elastic arm band included
• Weather sealed case
• Requires 2 "AA" Batteries (not included).
Available lighting styles:
- All LEDs on
- All LEDs flashing fast
- All LEDs flashing slow
- LEDs flashing in left-to-right pattern
- LEDs flashing in right-to-left pattern
- LEDs flashing fast in left-to-right pattern
- LEDs flashing in back-and-forth pattern
- All LEDs off
This lime Hi- Viz Boonie Hat with orange trim is ANSI 107-Class Headwear. Polyester woven 300D oxford with PU coating. Mesh venting. 1" reflective tape. One size fits all, circumference is 24".
ANSI/ISEA 107-2015 ANSI/ISEA Type R Class 2. Poncho Style. Lime yellow with lime yellow prismatic reflective trim. Reflexite reflective stripes and two reflective printed panels. Full 360 degree reflective visibility. Adjustable sides allow a better fit, flexibility, and ventilation. Measures 18 inches x 53 inches.
• Front and back of the vest is 18 inches across from side to side
• 12 inch belts on each side for adjustability
• Measures 53 inches from bottom hem on the front across the shoulders to bottom hem on the back
structions.
This red pinnie with SAFETY PATROL emblem screened on both sides is constructed of nylon and stitched at edges to prevent fraying. Completely washable. 44" x 11 1/2" size. Elastic waist strap allows fit for all sizes.
• All Plastic, Injection Molded A-Frame Leg
• Made of impact resistant polyethylene
• Accepts Plastic I-Beams, Type III Boards, and 1" x 8" Wood Boards
• Heavier leg requires less sand ballasting (Weighs 6 lbs.)
• Perfect for crowd control, road closures, and work zones
• Easy to set up, transport, and store. Use with one board or two
• Flashing light mounting receptacle on each leg
All Plastic, Injection Molded A-Frame Leg. Made of impact resistant polyethylene. Accepts 3 different types of boards: Plastic I-Beams, Type III Boards, and 1" x 8" Wood Boards. Heavier leg requires less sand ballasting (Weighs 6 lbs.). Perfect for crowd control, road closures, and work zones. Easy to set up, transport, and store. Use with one board or two. Flashing light mounting receptacle on each leg.
Economical 2" official's whistles. Made of high impact plastic with cork "pea" & stainless steel split ring. Available in 11 school colors.
Hollow, soft, lime glass. Uniform in size and quality. For general lab use. Cut in convenient 24 inch lengths.
• Perforated sides for cross-ventilation and maximum air circulation
• Moisture-wicking brow pad. Easily removable for replacement or washing
• Suspension pin-lock sizing adjusts for head sizes ranging 6.5 to 7.75
• Available in 4 colors
• With or without SCHOOL SAFETY PATROL label
• Does not meet ANSI/ISEA Z89.1 requirements
These bright helmets weigh only 7 oz. and have size adjusts from 6 1/2 to 7 3/4. Ideal for protecting head from lacerations, minor bumps and bruises in areas that do not require certified safety helmets. 4-point injection-molded suspension. Perforated sides for cross-ventilation and maximum air circulation. Moisture-wicking brow pad. Easily removable for replacement or washing.
Available in 4 colors with or without SCHOOL SAFETY PATROL label. Does not meet ANSI/ISEA Z89.1 requirements.
- Protects from minor bumps, such as walking into low door frames or signs.
- Enhances visibility and authority for students directing traffic or helping at crosswalks.
- Offers protection from accidental head contact in tight spaces.
- Can be color-coded to designate roles at assemblies, or community events.
- Helps reduce the chance of minor head injuries during setup or takedown.
- Helps protect against accidental contact in low clearance areas.
- Provides a visible, protective head covering for those managing drop-off zones.
• 18" x 18" sign
• STOP printed on both sides
• Meets MUTCD requirements for school zones
• 0.04 Aluminum material
• ORALITE® High Intensity Prismatic Grade reflective finish
• 12" safety orange PVC plastic handle.
• Weight including the handle is 1.55#
Committed to keeping school zones safe and secure, our paddle stop sign is designed to meet and exceed MUTCD requirements, providing peace of mind for educators, parents, and pedestrians alike.
Crafted with precision, each sign boasts a sizable 18" x 18" dimension, ensuring maximum visibility and compliance with regulations. Constructed from durable .04 aluminum, with an ORALITE® High Intensity Prismatic Grade reflective finish, our sign shines bright day or night, alerting drivers to slow down and stop for crossing students.
Equipped with a sturdy 12" safety orange PVC plastic handle, our paddle stop sign is easy to grip and maneuver, allowing school safety personnel to effectively manage traffic flow and ensure the safety of everyone in the vicinity.
Get their attention with this 1 3/4" Medium Weight Plastic Whistle. This pea whistle features a metal ring for easy attachment to lanyards.
12" Wide x 13 1/4" Long Printed on One Side These directional reinforcement devices give supplemental standard warnings and directions creating safer traffic control in the school area. Installs in seconds and firmly locks in place. Reusable, All-weather ABS plastic with UV. Used by thousands of schools, cities and utility companies.