• All Plastic Sign Frame
• Regressed sign area helps to protect sign faces
• Features “click lock” hinges for a positive interlock in the open position>
• Can be internally ballasted with sand
• Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces
• Outside Dimensions: 45”H X 25”W x 3”D
• Weight: 18.5 lbs (28.5 lbs. with sand)
The most cost effective way to advertise events, direct traffic or alert students of important information. Just attach your own 24" x 36" poster or sign with screws, or purchase our SA872P Changeable Message Sign Kit (sold separately). Overall Size 25" wide x 45" high. Sign regress of 24" wide x 36" high. Patented Locking Hinge Keeps Message Board Open. Hole with plug for sand ballasting. Unit weighs 18.5 lbs (28.5 lbs. with sand). Stacking lugs assure no sliding and scratching during shipping. Available only in white.Does not qualify for free shipping.
This 12" x 18" vinyl sign has a clear pocket that will hold a standard sheet of paper so you can make any sign you want! Comes with 28" cone and cone attachment. Includes: 28" orange cone, 12" x 18" vinyl sign, wire sign frame with PVC post and hardware.
• All Plastic, Injection Molded A-Frame Leg
• Made of impact resistant polyethylene
• Accepts Plastic I-Beams, Type III Boards, and 1" x 8" Wood Boards
• Heavier leg requires less sand ballasting (Weighs 6 lbs.)
• Perfect for crowd control, road closures, and work zones
• Easy to set up, transport, and store. Use with one board or two
• Flashing light mounting receptacle on each leg
All Plastic, Injection Molded A-Frame Leg. Made of impact resistant polyethylene. Accepts 3 different types of boards: Plastic I-Beams, Type III Boards, and 1" x 8" Wood Boards. Heavier leg requires less sand ballasting (Weighs 6 lbs.). Perfect for crowd control, road closures, and work zones. Easy to set up, transport, and store. Use with one board or two. Flashing light mounting receptacle on each leg.
• 15" x 15" sign
• Lightweight - weighs only 10 ounces!
• Lightweight corrugated plastic material with engineer grade reflective finish
• 1" PVC plastic handle.
Lightweight - weighs only 10 ounces! 15" x 15" size. Lightweight corrugated plastic material with engineer grade reflective finish. 1" PVC plastic handle.
NOTE: Does NOT meet MUTCD requirements for school zones.
12" Wide x 13 1/4" Long Printed on One Side These directional reinforcement devices give supplemental standard warnings and directions creating safer traffic control in the school area. Installs in seconds and firmly locks in place. Reusable, All-weather ABS plastic with UV. Used by thousands of schools, cities and utility companies.
• Perforated sides for cross-ventilation and maximum air circulation
• Moisture-wicking brow pad. Easily removable for replacement or washing
• Suspension pin-lock sizing adjusts for head sizes ranging 6.5 to 7.75
• Available in 4 colors
• With or without SCHOOL SAFETY PATROL label
• Does not meet ANSI/ISEA Z89.1 requirements
These bright helmets weigh only 7 oz. and have size adjusts from 6 1/2 to 7 3/4. Ideal for protecting head from lacerations, minor bumps and bruises in areas that do not require certified safety helmets. 4-point injection-molded suspension. Perforated sides for cross-ventilation and maximum air circulation. Moisture-wicking brow pad. Easily removable for replacement or washing.
Available in 4 colors with or without SCHOOL SAFETY PATROL label. Does not meet ANSI/ISEA Z89.1 requirements.
- Protects from minor bumps, such as walking into low door frames or signs.
- Enhances visibility and authority for students directing traffic or helping at crosswalks.
- Offers protection from accidental head contact in tight spaces.
- Can be color-coded to designate roles at assemblies, or community events.
- Helps reduce the chance of minor head injuries during setup or takedown.
- Helps protect against accidental contact in low clearance areas.
- Provides a visible, protective head covering for those managing drop-off zones.
• All Plastic Sign Frame
• 12in x 24in legend area
• Has "No Parking" printed on both sides
• Regressed sign area helps to protect sign faces
• Features “click lock” hinges for a positive interlock in the open position
• Can be internally ballasted with sand
• Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces
• Outside Dimensions: 36”H X 13”W x 3”D
• Weight: 10 lbs.
Molded all plastic hollow sign frame that can be internally weighted down with sand. Only 3 or 4 pounds is recommended per leg. Most of the weight is at the bottom where it acts like an anchor. They are extremely durable. Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces. Features “click lock” hinges for a positive interlock in the open position. Legend area measure 12in x 24in. “No Parking” printed on both sides. Outside Dimensions: 36”H X 13”W x 3”D. Weight: 10 lbs. Ships UPS or FedEx Ground.
• Closed message on a 28" fluorescent orange cone
• 18" high with 10.75" square base
• Made with 100% PVC polyvinyl chloride (contains no phthalates)
• Conical and top of base is one continuous layer
• Brilliant color with UV inhibitors for resistance to fading
• Good visibility under all weather condition
• Wide body design ensures stability
• Able to return to their original shape after impact
• Will not mar floors.
• Use as a traffic cone, or for hundreds of phys ed activities
These cones are constructed of brilliant fluorescent orange vinyl. Non-porous, dirt-resistant surface can be easily cleaned. Will not mar floors. Virtually indestructible. Will collapse under pressure then spring back into shape. Easy stacking. Choose from 13 different safety warnings printed in large, easy-to-read black letters on orange cones. These message cones may be used alone or in combination with our Cone Signs.
• 18" x 18" sign
• STOP printed on both sides
• Meets MUTCD requirements for school zones
• 0.04 Aluminum material
• ORALITE® High Intensity Prismatic Grade reflective finish
• 12" safety orange PVC plastic handle.
• Weight including the handle is 1.55#
Committed to keeping school zones safe and secure, our paddle stop sign is designed to meet and exceed MUTCD requirements, providing peace of mind for educators, parents, and pedestrians alike.
Crafted with precision, each sign boasts a sizable 18" x 18" dimension, ensuring maximum visibility and compliance with regulations. Constructed from durable .04 aluminum, with an ORALITE® High Intensity Prismatic Grade reflective finish, our sign shines bright day or night, alerting drivers to slow down and stop for crossing students.
Equipped with a sturdy 12" safety orange PVC plastic handle, our paddle stop sign is easy to grip and maneuver, allowing school safety personnel to effectively manage traffic flow and ensure the safety of everyone in the vicinity.
• All Plastic Sign Frame
• 24in x 24in legend area
• Has "No Pick Up / No Drop Off" printed on both sides
• Regressed sign area helps to protect sign faces
• Features “click lock” hinges for a positive interlock in the open position
• Can be internally ballasted with sand
• Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces
• Outside Dimensions: 36”H X 25”W x 3”D
• Weight: 17 lbs.
Molded all plastic hollow sign frame that can be internally weighted down with sand. Only 3 or 4 pounds is recommended per leg. Most of the weight is at the bottom where it acts like an anchor. They are extremely durable. Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces. Features “click lock” hinges for a positive interlock in the open position. Legend area measure 24in x 24in. “No Pick Up / No Drop Off” printed on both sides. Outside Dimensions: 36”H X 25”W x 3”D. Weight: 17 lbs. Ships UPS or FedEx Ground.
• All Plastic Sign Frame
• 24in x 24in legend area
• Has "School Bus Only / Do Not Enter" printed on both sides
• Regressed sign area helps to protect sign faces
• Features “click lock” hinges for a positive interlock in the open position
• Can be internally ballasted with sand
• Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces
• Outside Dimensions: 36”H X 25”W x 3”D
• Weight: 17 lbs.
Molded all plastic hollow sign frame that can be internally weighted down with sand. Only 3 or 4 pounds is recommended per leg. Most of the weight is at the bottom where it acts like an anchor. They are extremely durable. Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces. Features “click lock” hinges for a positive interlock in the open position. Legend area measure 24in x 24in. “School Bus Only / Do Not Enter” printed on both sides. Outside Dimensions: 36”H X 25”W x 3”D. Weight: 17 lbs. Ships UPS or FedEx Ground.
• All Plastic Sign Frame
• 24in x 24in legend area
• Has "PULL FORWARD" printed on both sides
• Regressed sign area helps to protect sign faces
• Features “click lock” hinges for a positive interlock in the open position
• Can be internally ballasted with sand
• Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces
• Outside Dimensions: 36”H X 25”W x 3”D
• Weight: 17 lbs.
These collapsible signs are molded hollow to be internally weighted down with sand. Most of the weight is at the bottom where it acts like an anchor. Ships UPS or FedEx ground. Extremely durable and printed on both sides. Overall size = 25" Wide x 36" High. Legend area measure 24" x 24". Ships UPS or FedEx Ground.
• All Plastic Sign Frame
• 12in x 24in legend area
• Has "No Pick Up/No Drop Off" printed on both sides
• Regressed sign area helps to protect sign faces
• Features “click lock” hinges for a positive interlock in the open position
• Can be internally ballasted with sand
• Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces
• Outside Dimensions: 36”H X 13”W x 3”D
• Weight: 10 lbs.
Molded all plastic hollow sign frame that can be internally weighted down with sand. Only 3 or 4 pounds is recommended per leg. Most of the weight is at the bottom where it acts like an anchor. They are extremely durable. Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces. Features “click lock” hinges for a positive interlock in the open position. Legend area measure 12in x 24in. “No Pick Up/No Drop Off” printed on both sides. Outside Dimensions: 36”H X 13”W x 3”D. Weight: 10 lbs. Ships UPS or FedEx Ground.
• 42” tall (47.5”H with handle)
• Stack up to 20% more on your truck!
- new compact nesting design
• Strong, ergonomic handle
- speeds placement on job
- fits two hands to make lifting with base easier
- string caution tape through handles
• Recessed area protects sheeting
• Use with 10, 16, or 30 lb. recycled rubber base (sold separately)
• Accepts same bases as our Navicade™ delineator
- reduces your base inventory
• NCHRP-350 Accepted, Meets MUTCD Standards
42” tall (47.5”H with handle) plain stacker cone. Stack up to 20% more on your truck! - new compact nesting design. Strong, ergonomic handle speeds placement on job, and fits two hands to make lifting with base easier. String caution tape through handles. Recessed area protects sheeting. Use with 10, 16, or 30 lb. recycled rubber base. Accepts same bases as our Navicade™ delineator - reduces your base inventory. NCHRP-350 Accepted, Meets MUTCD Standards.Base not included - Order separately.
12 3/4" Wide x 10 1/2" Long Printed on One Side These directional reinforcement devices give supplemental standard warnings and directions creating safer traffic control in the school area. Installs in seconds and firmly locks in place. Reusable, All-weather ABS plastic with UV. Used by thousands of schools, cities and utility companies.
• All Plastic Sign Frame
• 12in x 24in legend area
• Has "No Parking, Buses Only" printed on both sides
• Regressed sign area helps to protect sign faces
• Features “click lock” hinges for a positive interlock in the open position
• Can be internally ballasted with sand
• Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces
• Outside Dimensions: 36”H X 13”W x 3”D
• Weight: 10 lbs.
Molded all plastic hollow sign frame that can be internally weighted down with sand. Only 3 or 4 pounds is recommended per leg. Most of the weight is at the bottom where it acts like an anchor. They are extremely durable. Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces. Features “click lock” hinges for a positive interlock in the open position. Legend area measure 12in x 24in. “No Parking, Buses Only” printed on both sides. Outside Dimensions: 36”H X 13”W x 3”D. Weight: 10 lbs. Ships UPS or FedEx Ground.
Prevents cones from blowing over in windy areas. Octagon-shaped stabilizer provides easy placement over cone. Fits most sizes and types of traffic cones. 10.5" hole.
This 12" x 18" sign is screened on both sides. Constructed of nylon reinforced vinyl over a wire frame. Great for indoor or outdoor use. Sign comes with cone attachment and a 28" high impact polyethylene cone. 12" x 18" Sign. High Visibility. Interchangeable. Screened on Both Sides. Includes 28" Cone & Attachment. Overall Height is 56".
These snug fitting black rubber bases are made from recycled materials Bases are interchangeable with the Navicade™ or 42" Watchtower Stacker Cones. Available in 3 weight levels.
• All Plastic Sign Frame
• 12in x 24in legend area
• Has "School Bus Only, Do Not Enter" printed on both sides
• Regressed sign area helps to protect sign faces
• Features “click lock” hinges for a positive interlock in the open position
• Can be internally ballasted with sand
• Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces
• Outside Dimensions: 36”H X 13”W x 3”D
• Weight: 10 lbs.
Molded all plastic hollow sign frame that can be internally weighted down with sand. Only 3 or 4 pounds is recommended per leg. Most of the weight is at the bottom where it acts like an anchor. They are extremely durable. Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces. Features “click lock” hinges for a positive interlock in the open position. Legend area measure 12in x 24in. “School Bus Only, Do Not Enter” printed on both sides. Outside Dimensions: 36”H X 13”W x 3”D. Weight: 10 lbs. Ships UPS or FedEx Ground.
• All Plastic Sign Frame
• 12in x 24in legend area
• Has "Caution Children Crossing Ahead" printed on both sides
• Regressed sign area helps to protect sign faces
• Features “click lock” hinges for a positive interlock in the open position
• Can be internally ballasted with sand
• Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces
• Outside Dimensions: 36”H X 13”W x 3”D
• Weight: 10 lbs.
Molded all plastic hollow sign frame that can be internally weighted down with sand. Only 3 or 4 pounds is recommended per leg. Most of the weight is at the bottom where it acts like an anchor. They are extremely durable. Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces. Features “click lock” hinges for a positive interlock in the open position. Legend area measure 12in x 24in. “Caution Children Crossing Ahead” printed on both sides. Outside Dimensions: 36”H X 13”W x 3”D. Weight: 10 lbs. Ships UPS or FedEx Ground.
• Made with 100% PVC polyvinyl chloride (contains no phthalates)
• Conical and top of base is one continuous layer
• Brilliant color with UV inhibitors for resistance to fading
• Good visibility under all weather condition
• Wide body design ensures stability
• Able to return to their original shape after impact
• Will not mar floors.
• Use as a traffic cone, or for hundreds of phys ed activities
• Sets of 6 colors
• Available in 6 sizes
6" high with 6" square base
12" high with 8.25" square base
18" high with 10.75" square base
These colorful cones are constructed of tough weatherproof flexible vinyl. Non-porous, dirt-resistant surface can be easily cleaned. Will not mar floors. Virtually indestructible. Will collapse under pressure then spring back into shape. Easy stacking. Can be used for lane markers, crowd control, obstacle courses, boundary markers, marking danger areas, repair areas and driver training. 1 of each orange, yellow, red, blue, green, purple
• All Plastic Sign Frame
• 24in x 24in blank legend area
• Regressed sign area helps to protect sign faces
• Features “click lock” hinges for a positive interlock in the open position
• Can be internally ballasted with sand
• Stacking lugs facilitate handling by keeping stacked units from sliding and damaging sign faces
• Outside Dimensions: 36”H X 25”W x 3”D
• Weight: 17 lbs.
Small in stature but large sign display area of 24' wide x 24' high is great to advertise games, concerts, plays or any advertising where a smaller sign is need but big visibility. Available in yellow only. Overall Size 25' wide x 36' high
This 12" x 18" sign is screened on both sides. Constructed of nylon reinforced vinyl over a wire frame. Great for indoor or outdoor use. Sign comes with cone attachment and a 28" high impact polyethylene cone. 12" x 18" Sign. High Visibility. Interchangeable. Screened on Both Sides. Includes 28" Cone & Attachment. Overall Height is 56".