• Lightweight 100% polyester oxford with PU coating
• Pocket slits on side with rain guard
• Ankle snaps and fly closure
• Class E (for ensemble) when worn without other ANSI compliant garments
• Class 3 when worn with a Class 2 or Class 3 upper garment
• Available in 2 colors and 7 sizes
ANSI Class E (ensemble) when not worn with other ANSI 107 garment. 100% Polyester woven oxford w/PU coating. 5.5mm. Pocket slits on side with rain guard. Snap ankle and fly closure. Class 3 when worn with Class 2 or 3 vest. AwareLite reflective trim.
This lime Hi- Viz Boonie Hat with orange trim is ANSI 107-Class Headwear. Polyester woven 300D oxford with PU coating. Mesh venting. 1" reflective tape. One size fits all, circumference is 24".
This orange Hi- Viz Boonie Hat with lime trim is ANSI 107-Class Headwear. Polyester woven 300D oxford with PU coating. Mesh venting. 1" reflective tape. One size fits all, circumference is 24".
• 100% polyester 600D oxford with PVC coating.
• Adjustable straps.
• Silver reflective strips.
• Two side pockets with mesh vents.
• Front mesh pocket sized to hold full brim or cap style hard hat.
This Hi-Viz lime backpack measures 19.6" x 13" x 9.4". 100% Polyester 600D Oxford with PVC coating. Adjustable straps. Silver reflective stripe. Large mesh pockets. Front mesh pocket can hold one of our safety patrol helmets. Audio port for communication device.
• Perforated sides for cross-ventilation and maximum air circulation
• Moisture-wicking brow pad. Easily removable for replacement or washing
• Suspension pin-lock sizing adjusts for head sizes ranging 6.5 to 7.75
• Available in 4 colors
• With or without SCHOOL SAFETY PATROL label
• Does not meet ANSI/ISEA Z89.1 requirements
These bright helmets weigh only 7 oz. and have size adjusts from 6 1/2 to 7 3/4. Ideal for protecting head from lacerations, minor bumps and bruises in areas that do not require certified safety helmets. 4-point injection-molded suspension. Perforated sides for cross-ventilation and maximum air circulation. Moisture-wicking brow pad. Easily removable for replacement or washing.
Available in 4 colors with or without SCHOOL SAFETY PATROL label. Does not meet ANSI/ISEA Z89.1 requirements.
• Meets ANSI/ISEA Z89.1, TYPE 1 Class C, E, and G.
• 4-point woven nylon suspension.
• Moisture-wicking brow pad is removable, washable and replaceable.
• SEI Certified. Meets the low temperature (LT) option of the Z89.1 Standard.
• Accommodates a chin strap.
• Goggle retaining slots on suspension.
• Both Mega Ratchet and Slide-Lock Suspensions adjust to head sizes - 6.5 - 8.
These full brim safety helmets have 4-Point woven nylon suspension, and can accommodate a chin strap. Goggle retaining slots on suspension. Moisture wicking brow pad is removable, washable & replaceable. Slide-Lock size adjustment for head sizes 6.5 - 8. Weight: 13.58 oz. SEI Certified. ANSI/ISEA Z89.1, type 1, Class C, E and G requirements. Available in 4 colors.
• 100% acrylic
• Silver reflective stripe for visibility
• Great for under a hard hat or to wear alone
• Hi-Viz lime
• One size fits most
100% acrylic. Silver reflective stripe for visibility. Great for under a hard hat or to wear alone. Hi-Viz lime. One size fits most.
Mechanics style glove with hook & loop wrist band, Hi Vis Lime with Silver reflective stripes, Synthetic leather palm and fingertips, Spandex with foam, neoprene cuff, lycra cuff binding.
• 100% polyester 300D oxford with PU coating.
• Comfort collar, fleece lined.
• Removable fleece liner with quilted sleeves.
• Fleece liner has two slash pockets and right chest zipper pocket.
• Detachable and stowable hood.
• Mic tabs on both shoulders.
• Adjustable cuffs.
Outer shell includes: Six exterior pockets, right chest vertical zipper, left chest cell phone with hook & loop closure, left sleeve divided pen compartments and two slash pockets.
ANSI Class 3. Polyester 300D oxford with PU coating. Zipper closure. Comfort collar. Removable fleece liner. Fleece jacket has 2 slash pockets and right chest zipper pocket. Mic Tabs on both sides. Detachable and stowable hood. Outer shell includes 6 exterior pockets: right chest vertical zipper, left chest cell phone with hook and loop closure, left sleeve divided pen pocket and 2 slash pockets. Waterproof.
• Lightweight, multi-season.
• Rainguard zipper closure with interior storm flap.
• Comfort collar, fleece-lined.
• Three fused fabric layers.
• Breathable, waterproof and wind resistant.
• Comfortable polyester/spandex outer shell fused with fleece liner.
• Two exterior slash pockets with rain guard zipper closure.
• Channeled hem with cinch cord and cord lock for adjustable fit.
• Deluxe adjustable cuffs.
• Contoured waist.
Women's Class 2 polyester bonded with fleece. Contoured waste for better fit. 3 fused fabric layers: soft outer shell, weather resistant middle and warm brushed fleece interior. Breathable, water and wind resistant. Comfortable polyester/spandex. Draw string hem with cord stopper. Black bottom hides dirt and grime. 2 zippered slash pockets. Adjustable sleeve cuffs. Zipper closure with tunnel collar. Conforms to ANSI 107 standard.
• 100% polyester 300D oxford with PU coating.
• Zipper closure with snapped storm flap.
• 100% black polyester fleece liner.
• Left interior chest pocket.
• Two exterior slash pockets with rain guard.
• Detachable and stowable hood.
• Mic tabs on both shoulders.
• Adjustable cuffs.
ANSI Class 3. Polyester 300D oxford with PU coating. 100% Black polyester fleece lining. Zipper & snap front closure. Detachable and stowable hood. 2 exterior slash pockets with rain guard, 1 interior chest pocket. Mic tabs on both sides. Waterproof. Conforms to ANSI/ISEA 107 for design, color & reflectivity.
1 sheet with 7 strips. Self adhesive Reflexite retroreflective material. Measurements: 1/2" W x 22" L Curved shape to fit safety patrol helmets. Exceeds minimum reflectivity requirements of the proposed ANSI/ISEA 107 for high visibility.
1 sheet with 7 lime reflective strips. Self adhesive Reflexite retroreflective material. Measurements: 1/2" W x 22" L Curved shape to fit safety patrol helmets. Exceeds minimum reflectivity requirements of the proposed ANSI/ISEA 107 for high visibility.
1 sheet with 7 strips. Self adhesive Reflexite retroreflective material. Measurements: 1/2" W x 22" L Curved shape to fit safety patrol helmets. Exceeds minimum reflectivity requirements of the proposed ANSI/ISEA 107 for high visibility.
1 sheet with 7 orange reflective strips. Self adhesive Reflexite retroreflective material. Measurements: 1/2" W x 22" L Curved shape to fit safety patrol helmets. Exceeds minimum reflectivity requirements of the proposed ANSI/ISEA 107 for high visibility.
1 sheet with 7 strips. Self adhesive Reflexite retroreflective material. Measurements: 1/2" W x 22" L Curved shape to fit safety patrol helmets. Exceeds minimum reflectivity requirements of the proposed ANSI/ISEA 107 for high visibility.
1 sheet with 7 white reflective strips. Self adhesive Reflexite retroreflective material. Measurements: 1/2" W x 22" L Curved shape to fit safety patrol helmets. Exceeds minimum reflectivity requirements of the proposed ANSI/ISEA 107 for high visibility.
Ultra-light weight 100% polyester mesh neck shield. Attaches to the brim of all of our Safety Patrol and Full Brim style helmets.
Ultra-light weight 100% polyester mesh neck shield. Attaches to the brim of all of our Safety Patrol and Full Brim style helmets.
Ultra-light weight 100% polyester mesh neck shield. Attaches to the brim of all of our Safety Patrol and Full Brim style helmets.
• Adjustable hoop & loop closure
• ANSI/ISEA 107 Class headwear
• Adjustable size
- ANSI Class R2 lime vest.
- 100% polyester mesh.
- Mic tabs on both shoulders
- Two exterior waist pockets with Velcro closure
- Two exterior chest pockets
- Two interior waist pockets
- Zipper closure
- Conforms to ANSI/ISEA 107 standard for design, color and reflectivity.
- ANSI Class R2 lime vest.
- Flame Retardant treated polyester mesh background material
- 2 pockets- 1 exterior chest, 1 interior bottom
- Zipper closure
- Conforms to ANSI/ISEA 107 standard for design, color and reflectivity.
- Does not comply with the flame resistant requirements of ANSI 107-2015 as an FR garment.