Clamp features strong malleable iron frame that is painted to reduce corrosion.
Ths C-clamp with a 6 inch jaw opening features strong malleable iron frame that is painted to reduce corrosion.
Small butane burner uses clean burning butane and features a trigger ignition eliminating the need for wicks, matches or a central gas line. Stable, tip-resistant design and easy grip handle make the burner safe and portable. The flame height is fully adjustable and can reach a maximum temperature of approximately 1300 degrees C. The burner has a two hour fuel capacity and is compatible with standard butane cartridges. Fuel sold separately. One tank full will burn 1-2 hours.
Aluminum with 1/2" steel thumbscrews. Swivels and locks to any angle. For rods up to 5/8" diameter.
Aluminum with 1/2" steel thumbscrews. Swivels and locks to any angle. For rods up to 5/8" diameter.
Same as above but double and Plastisol coated jaws. Opening 3/8" to 1 3/8".
Durable, lightweight plastic instrument, designed for whiteboards/chalkboards. Made of white polystyrene and features handle for ease of use. 180 degrees marked with intervals of 1 degrees, 20" base,10" height.
Durable, lightweight plastic instrument, designed for whiteboards/chalkboards. Made of white polystyrene and features handle for ease of use. 180 degrees marked with intervals of 1 degrees, 20" base,10" height.
Contains all the basic professional borosilicate labware and equipment for conducting science experiments. The kit contains the text, "101 Science Experiments for Everyone" as a source of safe experiments.
Other components include:
1-Rubberized lab apron
1-Beaker - 100ml
1-Beaker - 250ml
1-Beaker - 400ml
1-Porcelain evaporating dish
1-250ml Erlenmeyer flask
1-Thistle tube, plastic
1-Safety goggles
1-50ml Graduated cylinder
1-Filtering paper
12-Medicine droppers
1-Spatula, stainless steel, 22cm length
1-Sponge 1x3-3/8"
3-Rubber stoppers, #6 solid
6-Test tubes 16x150mm
1-Test tube rack
1-Test tube brush
1-Test tube clamp, brass
1-Pair of crucible tongs
Pipestem triangle
1-Burner tripod, cast iron
1-Wire gauze square, 4x4"
1-Crucible, porcelain HF
1-Plastic cylinder 100 ml capacity
Durable, lightweight plastic instruments, designed for whiteboards/chalkboards. Triangles, protractor, and ruler are made of white polystyrene and feature handles for ease of use. Compass is made of clear acrylic, and accommodates most dry erase and magic markers. Set of 5 instruments, in reusable cardboard storage.
Plated Steel. Plastisol jaws. For beakers 50-2000 ml capacity. Flat riveted joint. Length 9". Jaw opening 4 1/2".
Plated Steel. Plastisol jaws. For beakers 50-2000 ml capacity. Flat riveted joint. Length 9". Jaw opening 4 1/2".
Perfect for counting, measuring and patterning. Plastic 1 cm cubes in 10 colors come in a storage tub with Activity Guide. Grades 1 +
This set of 1000 Centimeter cubes is perfect for counting, measuring and patterning. Plastic 1 cm cubes in 10 colors come in a storage tub with Activity Guide. Grades 1 +
A set of premium quality pH 4.01 and 7.01 calibration buffer solutions. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna’s line of calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened sachet. The HI77400P is for 5 sachets of pH 4.01 and 5 sachets of pH 7.01 with each containing 20 mL of buffer.
• For use with Checker 1 pH Meter
• Color coded label for easy pH buffer value identification
• Accuracy of +/- 0.01 pH @ 25°C
• Temperature chart of the actual pH value at various temperatures printed on each sachet
A set of premium quality pH 7.01 and 10.01 calibration buffer solutions. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna’s line of calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened sachet. 5 sachets of pH 7.01 and 5 sachets of pH 10.01 with each containing 20 mL of buffer.
• Color coded label for easy pH buffer value identification
• Accuracy of +/- 0.01 pH @ 25°C
• Temperature chart of the actual pH value at various temperatures printed on each bottle
This parameter is important in determination of the corrosive properties of water, caused by carbonates, bicarbonates as well as dissolved salts. Testing alkalinity is important in the treatment of drinking water, waste water, swimming pools, heating and cooling systems, food and beverage systems, and soil and environmental testing, as well as in agriculture, farming and fish farming. Includes 110 tests.
Clamp features strong malleable iron frame that is painted to reduce corrosion.
Ths C-clamp with a 4 inch jaw opening features strong malleable iron frame that is painted to reduce corrosion.
Clamp features strong malleable iron frame that is painted to reduce corrosion.
Ths C-clamp with a 2 inch jaw opening features strong malleable iron frame that is painted to reduce corrosion.
This burette has a clear acrylic body and leak proof stopcock with a self lubricating PTFE plug. Each burette is individually calibrated for maximum accuracy. Acrylic body is resistant to dilute mineral acids and bases except Hydrofluoric Acid and Ammonium Hydroxide. It can be used with pHs ranging from 1 to 14 and with up to 5% weight per weight of acids or 30% of bases. Graduations are at 0.1 ml.
This burette has a clear acrylic body and leak proof stopcock with a self lubricating PTFE plug. Each burette is individually calibrated for maximum accuracy. Acrylic body is resistant to dilute mineral acids and bases except Hydrofluoric Acid and Ammonium Hydroxide. It can be used with pHs ranging from 1 to 14 and with up to 5% weight per weight of acids or 30% of bases. Graduations are at 0.1 ml.
Stamped steel. Zinc plated. Jaw opening 3/8" to 1 3/8".
Stamped steel. Zinc plated. Jaw opening 3/8" to 1 3/8".
Will hold 2 burettes 7 1/4" apart. Stamped steel. Zinc plated. For burettes 6mm to 16mm.
Will hold 2 burettes 7 1/4" apart. Stamped steel. Zinc plated. For burettes 6mm to 16mm.
Designed and developed to be a lightweight B.O.D. carrier. For storage, incubation and handling of reagent B.O.D. bottles from 55-70mm.
• Made of high density polypropylene
• Chemically resistant
• Heat resistant
• Sturdy, Heavy duty construction 13 1/8" x 6 3/4" x 6 1/4" 12 pcs
Designed and developed to be a lightweight B.O.D. carrier. For storage, incubation and handling of reagent B.O.D. bottles from 55-70mm. Made of high density polypropylene. Chemically resistant. Heat resistant. Sturdy, Heavy duty construction. 13 1/8" x 6 3/4" x 6 1/4" 12 pcs
Tinned iron. Ceramic. Turned edges.
Tinned iron. Ceramic. Turned edges.
Handles beakers from 100 to 1500 ml capacity. Stainless steel. Riveted joint. . .Jaws are fiberglass covered. Length 13 1/2".
Handles beakers from 100 to 1500 ml capacity. Stainless steel. Riveted joint. . .Jaws are fiberglass covered. Length 13 1/2".
For controlling flow through flexible tubing. Nickel-plated brass. Jaw opening 1/2" to 3/4".
For controlling flow through flexible tubing. Nickel-plated brass. Jaw opening 1/2" to 3/4".
Nickel-plated brass tube 12 mm diameter with a non-removable screw type air regulator also provided with a threaded needle valve flame intensity regulator, with brass 9 mm diameter serrated gas inlet tube. On stable heavy cast-iron base, baked hammertone finish.
Capacity: 2610 Grams Sensitivity: 0.1 Grams Calibrations: Front Beam - 10g x 0.1g, Center Beam - 500g x 100g, Rear Beam - 100g x 10g Adam's Triple Beam is today's best value for teaching mass measurement concepts from a brand scientists worldwide have trusted for over thirty years. It offers the functions and durability you need in a generous 2610g capacity plus an array of special classroom features that you will appreciate. With a larger overall body than other triple beam balances, it's the sturdiest choice for the classroom. Quality construction with strong metal housing and a stainless steel pan. Innovative built-in tripod legs allow you to do density demonstrations wherever you want (without the inconvenience of having to clamp onto a table.)
Capacity: 2610 Grams. Sensitivity: 0.1 Grams. Calibrations: Front Beam - 10g x 0.1g, Center Beam - 500g x 100g, Rear Beam - 100g x 10g. Created to withstand daily student use, Adam Equipment's patented TBB triple beam mechanical balance offers a superb value for teaching mass measurement concepts. With rugged construction and security slot to prevent theft, the durable TBB is ideal for classroom environments. Sturdy metal housing and a grade 304 stainless steel pan help the balance withstand daily student use. Other features include tripod legs for density measurement, weigh-below hook, magnetic damping for faster stability, notched and tiered graduated beams with center reading, and holders for storing extra weights.
This burette has a clear acrylic body and leak proof stopcock with a self lubricating PTFE plug. Each burette is individually calibrated for maximum accuracy. Acrylic body is resistant to dilute mineral acids and bases except Hydrofluoric Acid and Ammonium Hydroxide. It can be used with pHs ranging from 1 to 14 and with up to 5% weight per weight of acids or 30% of bases. Graduations are at 0.1 ml.
This burette has a clear acrylic body and leak proof stopcock with a self lubricating PTFE plug. Each burette is individually calibrated for maximum accuracy. Acrylic body is resistant to dilute mineral acids and bases except Hydrofluoric Acid and Ammonium Hydroxide. It can be used with pHs ranging from 1 to 14 and with up to 5% weight per weight of acids or 30% of bases. Graduations are at 0.1 ml.