Strong Aluminum Pulleys with deep V-grooves mounted in metal bracket with hooks on both ends. Pulleys are 2" (50mm) dia.
Strong Aluminum Pulleys with deep V-grooves mounted in metal bracket with hooks on both ends. Pulleys are 2" (50mm) dia.
Newton's Second Law of Motion. Demonstrates inertia.
Newton's Second Law of Motion. Demonstrates inertia.
Strong all metal construction, can be mounted on a table up to 2" (50mm) thick. Aluminum Pulley, 1.125" (300m) diameter, mounted on a vertically height adjustable bracket, which can slide up and down, and can be tightened at any point, from being parallel to the clamping surface, up to 2" (50mm) higher to the clamping surface.
Strong all metal construction, can be mounted on a table up to 2" (50mm) thick. Aluminum Pulley, 1.125" (300m) diameter, mounted on a vertically height adjustable bracket, which can slide up and down, and can be tightened at any point, from being parallel to the clamping surface, up to 2" (50mm) higher to the clamping surface.
Battery charged electro-magnetic mobile with perpetually moving forms. 9 1/4" high. One 9V battery required.
Battery charged electro-magnetic mobile with perpetually moving forms. 9 1/4" high. One 9V battery required.
A very ecconomical apparatus to demonstrate that light and heavy objects fall at the same rate / accelaration in a vacuum. Apparatus consists of a 36" (910mm) long x 2.25" (55mm) diameter, transparent tube with a stopcock mounted in a rubber stopper on one end, and a solid rubber stopper on the other end. Supplied complete with a 13" long vinyl tubing for connection to a vacuum pump (not supplied), a metal disc and a feather.
A very ecconomical apparatus to demonstrate that light and heavy objects fall at the same rate / accelaration in a vacuum. Apparatus consists of a 36" (910mm) long x 2.25" (55mm) diameter, transparent tube with a stopcock mounted in a rubber stopper on one end, and a solid rubber stopper on the other end. Supplied complete with a 13" long vinyl tubing for connection to a vacuum pump (not supplied), a metal disc and a feather.
6 cm in diameter. Supplied with supported base with socket at top end for holding the gyroscope and demonstrating various principles.
6 cm in diameter. Supplied with supported base with socket at top end for holding the gyroscope and demonstrating various principles.
For demonstrating Hooke's Law and for studying simple harmonic motion of vibrating weight suspended from spring and potential energy. It consists of a heavy base with an adjustable mirror millimeter scale, a spiral spring with indicator and weight hanger. Complete with four 50g slotted weights. Instructions included.
For demonstrating Hooke's Law and for studying simple harmonic motion of vibrating weight suspended from spring and potential energy. It consists of a heavy base with an adjustable mirror millimeter scale, a spiral spring with indicator and weight hanger. Complete with four 50g slotted weights. Instructions included.
Polished wooden top 600x100x 20mm. With pulley. Hinged to a polished wooden base 400 x 100 x 20mm. The plane can be fixed at any angle with the help of a clamp. Supplied complete with aluminum graduated protractor, cylindrical plated metal roller 38mm in diameter and scale pan but without weights.
Polished wooden top 600x100x 20mm. With pulley. Hinged to a polished wooden base 400 x 100 x 20mm. The plane can be fixed at any angle with the help of a clamp. Supplied complete with aluminum graduated protractor, cylindrical plated metal roller 38mm in diameter and scale pan but without weights.
This robustly constructed inertia demonstrator works reliably every time and is a great improvement on traditional versions of this classic experiment. A steel ball rests on a thin metal card on top of a pillar, and a spring-loaded catch is mounted next to the pillar. When the catch is released, a piston strikes the edge of the metal card sharply. The card flies out from under the ball, which remains in place on top of the pillar due to its large inertial mass. The card is tethered to the aluminum base for easy recovery after the experiment.
This robustly constructed inertia demonstrator works reliably every time and is a great improvement on traditional versions of this classic experiment. A steel ball rests on a thin metal card on top of a pillar, and a spring-loaded catch is mounted next to the pillar. When the catch is released, a piston strikes the edge of the metal card sharply. The card flies out from under the ball, which remains in place on top of the pillar due to its large inertial mass. The card is tethered to the aluminum base for easy recovery after the experiment.
Pulley is high-quality impact-resistant, chip-proof injection molded, balanced wheel. Smooth, clean V-groove. Wheel diameter 2", 360 degrees swivel hooks-top and bottom. All steel blocks.
Aluminum pulley 37mm diameter. mounted in thick strong metal frame for clamping to benches or boards.
Aluminum pulley 37mm diameter. mounted in thick strong metal frame for clamping to benches or boards.
Aluminum pulley 50mm diameter. Mounted in a bracket on a rod.
Aluminum pulley 50mm diameter. Mounted in a bracket on a rod.
Rugged plastic pulley with deep V groves mounted on a metal clamp. The sheave is 50mm in diameter. Clamp can be mounted on surfaces up to 25mm thick.
Rugged plastic pulley with deep V groves mounted on a metal clamp. The sheave is 50mm in diameter. Clamp can be mounted on surfaces up to 25mm thick.
General purpose use and also for use with inclined plane. Metal pan with cords for suspension.
Pulley is high-quality impact-resistant, chip-proof injection molded, balanced wheel. Smooth, clean V-groove. Wheel diameter 2", 360 degrees swivel hooks-top and bottom. All steel blocks.
The design of the Spillnot uses the principles of Newtonian physics to keep the liquid in the container. The flexible handle and location of the suspension point above the center of the tray ensure that the forces on the liquid are always directed toward the supporting tray, even when the tray is in motion. Sideways forces usually responsible for spills are not transmitted to the tray by the flexible handle. Radial forces generated during swinging motion only force the liquid into the container more firmly. An inexpensive demonstration to intrigue students and challenge their analytical powers! Includes activity guide. 5" x 5" x 9". Weight: .25 lbs.
The design of the Spillnot uses the principles of Newtonian physics to keep the liquid in the container. The flexible handle and location of the suspension point above the center of the tray ensure that the forces on the liquid are always directed toward the supporting tray, even when the tray is in motion. Sideways forces usually responsible for spills are not transmitted to the tray by the flexible handle. Radial forces generated during swinging motion only force the liquid into the container more firmly. An inexpensive demonstration to intrigue students and challenge their analytical powers! Includes activity guide. 5" x 5" x 9". Weight: .25 lbs.